http://i3detroit.com/wi/api.php?action=feedcontributions&user=Nate+lapt&feedformat=atomi3Detroit - User contributions [en]2013-06-19T02:21:13ZUser contributionsMediaWiki 1.18.1http://i3detroit.com/wi/index.php?title=Category:NetworkingCategory:Networking2013-05-25T02:18:42Z<p>Nate lapt: /* IP Addresses in use */</p>
<hr />
<div>= Wireless Network =<br />
<br />
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment). <br />
<br />
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.<br />
<br />
<br />
= LAN Addresses =<br />
<br />
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.<br />
<br />
<br />
== Subnet: 10.13.0.0/24 ==<br />
<br />
<br />
=== Static Hosts ===<br />
<br />
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change. <BR><BR>Most member and guest laptops, however, do not need one of these.<br />
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.<br />
<BR><br />
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.<br />
<BR><br />
<br />
'''Static hosts use the following settings:'''<br />
<br />
{|<br />
|-<br />
| IP address<br />
| Take an unused address from the table below. Document which address you used. When in doubt, ping first.<br />
|-<br />
| Subnet mask<br />
| 255.255.255.0<br />
|-<br />
| Default Gateway<br />
| 10.13.0.1<br />
|-<br />
| DNS Server<br />
| 10.13.0.1<br />
|-<br />
| DNS domain name<br />
| i3detroit.local<br />
|-<br />
| Time / NTP server<br />
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)<br />
|}<br />
<br />
<BR><BR><br />
<br />
=== IP Addresses in use === <br />
{|<br />
|-<br />
! Address <br />
! Host <br />
! Description <br />
! Admin(s)<br />
|-<br />
| 10.13.0.1 <br />
| pfsense <br />
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.<br />
|-<br />
| 10.13.0.5<br />
| [[i3switch01]]<br />
| This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.6<br />
| Cisco 1130 AP i3DetroitAP01<br />
| This is primary access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.7<br />
| Cisco 1130 i3DetroitAP02<br />
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.8 <br />
| Asterisk <br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
Going Away<br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.9 <br />
| Asterisk VM<br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.10<br />
| [[Wireless LAN Controller]]<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.11<br />
| [[Wireless LAN Controller]] IP #2 (required)<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.13 <br />
| Camera Server - This can be re-purposed <br />
| Big brother is watching you. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.14<br />
| Cisco 1130 i3DetroitAP03<br />
| This is the back-of-shop access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.15 <br />
| i3Debian - Skynet<br />
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical<br />
Going away!! <br />
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross<br />
|-<br />
| 10.13.0.16 <br />
| ESXI<br />
| VMWare ESXI<br />
| [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.17 <br />
| Skynet - VM<br />
| "The Ubuntu Box" Runs the Twitter internal scripts <br />
| Ted, [[User:Nate_lapt| NateW]], Matt O<br />
|-<br />
| 10.13.0.18<br />
| FileSaurus<br />
| FileServer<br />
| Jason T, [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.20<br />
| [[Power Meter]]<br />
| Ethernet<->RS485 adapter for the power meter<br />
| Ted<br />
|-<br />
| 10.13.0.30<br />
| OpenAccess Control 3.0<br />
| New (still future) [[RFID entry system]]<br />
| Evan Allen<br />
|-<br />
| 10.13.0.40<br />
| [[i3Switch02]]<br />
| i3 Second managed Ethernet switch in rack<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.50 <br />
| Plotter <br />
| [[HOWTO use the Plotter|The HP DesignJet 300 ]] <br />
| Roger, Rocco?<br />
|-<br />
| 10.13.0.51 <br />
| Laserjet-5si <br />
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area <br />
| Rocco<br />
|-<br />
| 10.13.0.53 <br />
| Color LaserJet 4650n <br />
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]]n printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.54<br />
| Color LaserJet 4650dn <br />
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.62<br />
| CLP-620ND<br />
| Big color laser printer<br />
| Nate B<br />
|-<br />
| 10.13.0.75<br />
| Project 1<br />
| A super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.76<br />
| Project 2<br />
| Another super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.90 <br />
| First-Cam <br />
| The Axis 206 network camera over the FIRST corner. <br />
| Ted, [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.91<br />
| Polycom-ATA<br />
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken'' <br />
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.99 <br />
| printer<br />
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack. <br />
| NateB<br />
|-<br />
| 10.13.0.100-245<br />
| DHCP RANGE <br />
| This is the DHCP range handed out by the firewall. Reservations possible<br />
|}<br />
<br />
= DNS =<br />
<br />
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.<br />
<br />
= FAQ =<br />
<br />
Q: Can we open a port in the firewall for my XYZ server? <br />
<br />
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.<br />
<br />
Q: Let's get some better bandwidth at the space! <br />
<br />
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.<br />
<br />
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn? <br />
<br />
:A: Kid, you are up past your bedtime.<br />
<br />
[[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2013-05-08T04:34:13Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Create vinyl signs<br />
| "DO NO SPRAY PAINT OUTSIDE OVER PAVEMENT!!"<br />
|<br />
|<br />
|-<br />
| Change the oil in the air compressor<br />
|<br />
|<br />
|<br />
|-<br />
| Clean out and move Nick's stuff to bay<br />
|<br />
|<br />
|<br />
|-<br />
| Reaffix lights to kitchen ceiling<br />
|<br />
|<br />
|<br />
|-<br />
| Upgrade air-compressor plumbing.<br />
| Spec out components for 1/2" line between compressor and building-line.<br />
|<br />
| $20-30<br />
|-<br />
| Affix chainlink fence or other material around dust collector chain area<br />
|<br />
|<br />
|<br />
|-<br />
| Display T-shirts in kitchen<br />
| <br />
|<br />
| <br />
|-<br />
| Resupply all papertowel/tape/pen holders<br />
| <br />
|<br />
| $15<br />
|-<br />
| Replace/add additional lighting. T8 fixtures.<br />
| Survey locations and circuits, update this page.<br />
|<br />
| $100-200<br />
|-<br />
| </strike>Fix/redesign flammables cabinet latch</strike><br />
| <br />
| thanks Nate W!<br />
| <br />
|-<br />
| Zoned motion office Lighting<br />
| Source some ultrasonic motion detectors.<br />
|<br />
| $100-300<br />
|-<br />
| Organize<br />
| Remove clutter/fire/tripping/where does this go hazards from floor and aisle ways<br />
|<br />
|<br />
|-<br />
| Metal shop cord reel has extension cord<br />
| Remove, run conduit and outlet double-gang box.<br />
|<br />
|<br />
|-<br />
| Whiteboard room clutter<br />
| CLEAN AND ORGANIZE!!<br />
|<br />
|<br />
|-<br />
| Welding light has extension cord<br />
| 2x 15' ext cords?<br />
|<br />
|<br />
|-<br />
| light over bay<br />
| 1x 10' ext cord<br />
|<br />
|<br />
|-<br />
| Re-re-hang the welding curtain so it juuuust touches the ground.<br />
|<br />
|<br />
|<br />
|-<br />
| <strike>Fire extinguishers</strike><br />
| <strike>Renew</strike><br />
|<br />
|<br />
|-<br />
| Metal shop fan<br />
| fix or remove<br />
|<br />
|<br />
|-<br />
| Remove extension cords from ceiling beams, tidy up the overhead situation in general<br />
|<br />
|<br />
|<br />
|-<br />
| Finish edges of e-room carpet<br />
| <br />
|<br />
|<br />
|-<br />
| Build electronic crashbar for front door<br />
|<br />
|<br />
|<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
| make more "propaganda signs"<br />
| sayings about labeling your stuff and such<br />
|<br />
|<br />
|-<br />
| install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
| mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
| <strike>install automatic drain on air compressor</strike><br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Finish forklift repair<br />
|Install protection for vulnerable wiring harness, etc.?<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>have nick take home lights, juki, and jointer</strike><br />
|<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|install more-closely-spaced vertical dividers in wood shop sheet storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build 3 lockable money boxes</strike><br />
| 3 done<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|Rebuild Miter Saw Stand and Bench<br />
|Saving floor Space<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
| setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
| return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
| build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>Build wood shop machine cart</strike><br />
|All tools on Carts<br />
|<br />
|<br />
|-<br />
|Remove stored wood from machine shop loft, cull/sort stored metal<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Install Casters on Wood Shop router table</strike><br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2013-04-21T03:19:00Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Lights<br />
| Replace/add additional lighting. T8 fixtures.<br />
|<br />
| $100-200<br />
|-<br />
| Fix/redesign flammables cabinet latch<br />
| <br />
|<br />
| <br />
|-<br />
| Display T-shirts in kitchen<br />
| <br />
|<br />
| <br />
|-<br />
| Resupply all papertowel/tape/pen holders<br />
| <br />
|<br />
| <br />
|-<br />
| Zoned motion office Lighting<br />
| Source some ultrasonic motion detectors.<br />
|<br />
| $100-300<br />
|-<br />
| Organize<br />
| Remove clutter/fire/tripping/where does this go hazards from floor and aisle ways<br />
|<br />
|<br />
|-<br />
| Metal shop cord reel has extension cord<br />
| Remove, run conduit and outlet double-gang box.<br />
|<br />
|<br />
|-<br />
| Whiteboard room clutter<br />
| CLEAN AND ORGANIZE!!<br />
|<br />
|<br />
|-<br />
| Welding light has extension cord<br />
| Remove, run new outlet within reach of lights<br />
|<br />
|<br />
|-<br />
| light over bay<br />
| Remove extension cord, run new outlet to light<br />
|<br />
|<br />
|-<br />
| Fire extinguishers<br />
| Renew<br />
|<br />
|<br />
|-<br />
| Metal shop fan<br />
| fix or remove<br />
|<br />
|<br />
|-<br />
| Rehang the welding curtain so it juuuust touches the ground.<br />
|<br />
|<br />
|<br />
|-<br />
| Affix chainlink fence or other material around dust collector chain area<br />
|<br />
|<br />
|<br />
|-<br />
| Remove extension cords from ceiling beams, tidy up the overhead situation in general<br />
|<br />
|<br />
|<br />
|-<br />
| Change the oil in the air compressor<br />
|<br />
|<br />
|<br />
|-<br />
| Reaffix lights to kitchen ceiling<br />
|<br />
|<br />
|<br />
|-<br />
| Finish edges of e-room carpet<br />
| <br />
|<br />
|<br />
|-<br />
| Build electronic crashbar for front door<br />
|<br />
|<br />
|<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Finish forklift repair<br />
|Install protection for vulnerable wiring harness, etc.?<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>have nick take home lights, juki, and jointer</strike><br />
|Juki and lights have left, Jointer is also gone<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|install more-closely-spaced vertical dividers in wood shop sheet storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build 3 lockable money boxes</strike><br />
| 3 done<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|Rebuild Miter Saw Stand and Bench<br />
|Saving floor Space<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>Build wood shop machine cart</strike><br />
|All tools on Carts<br />
|<br />
|<br />
|-<br />
|Remove stored wood from machine shop loft, cull/sort stored metal<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Install Casters on Wood Shop router table</strike><br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Meeting_Minutes_20130416Meeting Minutes 201304162013-04-17T04:18:56Z<p>Nate lapt: </p>
<hr />
<div>'''Regular member meeting<br />
<br />
i3Detroit<br />
<br />
Tuesday April 16, 2013<br />
'''<br />
<br />
'''Attendees'''<br />
<br />
Maddy Winans<br />
<br />
Matt Oehrlein<br />
<br />
Margaret Lyell<br />
<br />
Dave Scholl<br />
<br />
Matt Huber<br />
<br />
Eric Merrill<br />
<br />
Dustin White<br />
<br />
Rocco Marras<br />
<br />
Steve Nowicki (f00f)<br />
<br />
Roger Slykhouse<br />
<br />
Nate W.<br />
<br />
Chris Prout<br />
<br />
Jacob Zells<br />
<br />
Marie Enga<br />
<br />
Chris Allington<br />
<br />
Steve Hermann<br />
<br />
Nate Bezanson<br />
<br />
Steve Hermann<br />
<br />
Devon Truscott<br />
<br />
<br />
<br />
'''Agenda'''<br />
<br />
<br />
''Dustin is losing his voice so Ted is going to be running the meeting''<br />
<br />
<br />
==New Member/Guest Introduction==<br />
<br />
Jim - guest from Cincinnati hacker space<br />
<br />
Brenden <br />
<br />
Chris- Joining tonight!<br />
<br />
Daniel - has a project<br />
<br />
<br />
==Nate B’s Arduino Puzzle Hunt==<br />
<br />
<br />
Nate- yes! so, was anyone else here at the arduino this arduino thing in ann arbor?<br />
massimio bansi was in Ann arbor i laser cut little puzzle boards and handed them out. There’s a URL on it and if you go there it starts the puzzle. No one has figured it out yet! There was one person who got as far as step 4. There is one person who is out there who’s . you can win a free month membership. Blog post is worth it, see if we can get some attention. Dustin and Nate B are paying for the free membership.<br />
<br />
<br />
Chris Allington motions to have i3Detroit use funds to pay for free membership <br />
<br />
4 in favor of <br />
<br />
0 oppossed<br />
<br />
none opposed, motion passes<br />
<br />
<br />
''Dustin is going to find a new trophy case''<br />
<br />
<br />
==Open access controller==<br />
<br />
Margaret- back last October open access controller to make it accessible for i3 modified it, it is now running and passing tests, and basically we are done with this phase, we have 2 more phases to implement<br />
<br />
<br />
==CRM information needs to be integrated==<br />
<br />
Ted- does anyone want to volunteer to join on this?<br />
<br />
<br />
''Nate B Does!''<br />
<br />
<br />
Ted- do we need more help?<br />
<br />
<br />
Nate- This is it’s own meeting in itself. We will meet another time.<br />
<br />
<br />
Ted- this is a critical component for i3west. This has stalled because no one has stepped up to take charge of that.<br />
<br />
Margaret- if anyone wants to see a demo come see after the meeting.<br />
<br />
<br />
<br />
==Guest Daniel Alex and the "Find What's Inside" project==<br />
<br />
<br />
Daniel - I started a website called findwhatsinside.com it’s in beta right now. Contact@i3detroit.com PW: i3D#&R0IT<br />
I take things apart a lot, to see what's inside. I've created a user generated database to gather what information is inside of various things.<br />
<br />
''Invites us to come enter information''<br />
<br />
Rocco- is this a pay website?<br />
<br />
Daniel - It's free!<br />
<br />
<br />
==Serial-signals class wrap up / next one==<br />
<br />
<br />
Nate B- it went well! there were 4 people that registered. serial ports inside of all different kinds of things. 2 people showed up and there was no space to hold the class! Perhaps this there something else that I should be doing to reserve space for classes?<br />
<br />
Ted- The electronics room might need some special attention<br />
<br />
<br />
Eric M - I didn't know that it was going to be in the e lab and i din't know it was going to take up the majority of the space in the e-lab. I think there should be a sign posted somewhere physically, and outlining that the e-lab will be closed on X day.<br />
<br />
<br />
''Announce list?''<br />
<br />
WHITE BOARD WILL BE USED IF THE E-LAB OR ANY OTHER SPACE NEEDS TO BE USED FOR A SPECIFIC CLASS<br />
<br />
==Red Bull update==<br />
<br />
<br />
Eric M- So as some of you know we are working on the red bull creation qualifier. They are returning this year to New York. Eric goes over an overview of the last time Red Bull Creation happened in New York. It is almost as if red bull creation last year did not happen. Red bull creation is where Brodie got her name from Rocco. Eric explains the project that is being created for the qualifier...A beat machine of some sort... Sounds pretty awesome! If anyone wants to solder this weekend, we are going to have a soldering party this weekend! we have to produce a video, including public display.<br />
<br />
''Eric wants to request about $400 to help with expenses for this''<br />
<br />
''Nate B Motions for expenses to be paid up to $500 with i3Detroit funds, provided all receipts are turned in to the treasurer.''<br />
<br />
''6 in favor<br />
<br />
<br />
None opposed<br />
<br />
<br />
<br />
motion carries''<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
==New Business==<br />
Matt O- the next iteration of bob ross is happening may 18th, and it’s going to be all-out. 3 classes all day long. $25 for short session and $35 for the longer sessions.<br />
<br />
Steve Hermann - something happened to the grinder. the wheel on the tool grinder was plugged with aluminum. hard wheel grinder don’t <br />
<br />
''Cameras need to be finished, because we need to find out who is ruining tools''<br />
<br />
'''Potlock prep and task review'''<br />
<br />
''May 11th <br />
come see Maddy get drunk and use a power drill!!''<br />
<br />
''Nate B goes over the to-do list for potlock, and carries into after the meeting.''<br />
<br />
Nate B - Everyone can help!<br />
<br />
Ted- Oh Boy!<br />
<br />
<br />
end 8:11<br />
<br />
[[Category:Meeting Minutes]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Meeting_Minutes_20130416Meeting Minutes 201304162013-04-17T04:18:00Z<p>Nate lapt: </p>
<hr />
<div>'''Regular member meeting<br />
<br />
i3Detroit<br />
<br />
Tuesday April 16, 2013<br />
'''<br />
<br />
'''Attendees'''<br />
<br />
Maddy Winans<br />
<br />
Matt Oehrlein<br />
<br />
Margaret Lyell<br />
<br />
Dave Scholl<br />
<br />
Matt Huber<br />
<br />
Eric Merrill<br />
<br />
Dustin White<br />
<br />
Rocco Marras<br />
<br />
Steve Nowicki (f00f)<br />
<br />
Roger Slykhouse<br />
<br />
Nate W.<br />
<br />
Chris Prout<br />
<br />
Jacob Zells<br />
<br />
Marie Enga<br />
<br />
Chris Allington<br />
<br />
Steve Hermann<br />
<br />
Nate Bezanson<br />
<br />
Steve Hermann<br />
<br />
Devon Truscott<br />
<br />
<br />
<br />
'''Agenda'''<br />
<br />
<br />
''Dustin is losing his voice so Ted is going to be running the meeting''<br />
<br />
<br />
'''New Member/Guest Introduction'''<br />
<br />
Jim - guest from Cincinnati hacker space<br />
<br />
Brenden <br />
<br />
Chris- Joining tonight!<br />
<br />
Daniel - has a project<br />
<br />
<br />
==Nate B’s Arduino Puzzle Hunt==<br />
<br />
<br />
Nate- yes! so, was anyone else here at the arduino this arduino thing in ann arbor?<br />
massimio bansi was in Ann arbor i laser cut little puzzle boards and handed them out. There’s a URL on it and if you go there it starts the puzzle. No one has figured it out yet! There was one person who got as far as step 4. There is one person who is out there who’s . you can win a free month membership. Blog post is worth it, see if we can get some attention. Dustin and Nate B are paying for the free membership.<br />
<br />
<br />
Chris Allington motions to have i3Detroit use funds to pay for free membership <br />
<br />
4 in favor of <br />
<br />
0 oppossed<br />
<br />
none opposed, motion passes<br />
<br />
<br />
''Dustin is going to find a new trophy case''<br />
<br />
<br />
==Open access controller==<br />
<br />
Margaret- back last October open access controller to make it accessible for i3 modified it, it is now running and passing tests, and basically we are done with this phase, we have 2 more phases to implement<br />
<br />
<br />
==CRM information needs to be integrated==<br />
<br />
Ted- does anyone want to volunteer to join on this?<br />
<br />
<br />
''Nate B Does!''<br />
<br />
<br />
Ted- do we need more help?<br />
<br />
<br />
Nate- This is it’s own meeting in itself. We will meet another time.<br />
<br />
<br />
Ted- this is a critical component for i3west. This has stalled because no one has stepped up to take charge of that.<br />
<br />
Margaret- if anyone wants to see a demo come see after the meeting.<br />
<br />
<br />
<br />
==Guest Daniel Alex and the "Find What's Inside" project==<br />
<br />
<br />
Daniel - I started a website called findwhatsinside.com it’s in beta right now. Contact@i3detroit.com PW: i3D#&R0IT<br />
I take things apart a lot, to see what's inside. I've created a user generated database to gather what information is inside of various things.<br />
<br />
''Invites us to come enter information''<br />
<br />
Rocco- is this a pay website?<br />
<br />
Daniel - It's free!<br />
<br />
<br />
==Serial-signals class wrap up / next one==<br />
<br />
<br />
Nate B- it went well! there were 4 people that registered. serial ports inside of all different kinds of things. 2 people showed up and there was no space to hold the class! Perhaps this there something else that I should be doing to reserve space for classes?<br />
<br />
Ted- The electronics room might need some special attention<br />
<br />
<br />
Eric M - I didn't know that it was going to be in the e lab and i din't know it was going to take up the majority of the space in the e-lab. I think there should be a sign posted somewhere physically, and outlining that the e-lab will be closed on X day.<br />
<br />
<br />
''Announce list?''<br />
<br />
WHITE BOARD WILL BE USED IF THE E-LAB OR ANY OTHER SPACE NEEDS TO BE USED FOR A SPECIFIC CLASS<br />
<br />
==Red Bull update==<br />
<br />
<br />
Eric M- So as some of you know we are working on the red bull creation qualifier. They are returning this year to New York. Eric goes over an overview of the last time Red Bull Creation happened in New York. It is almost as if red bull creation last year did not happen. Red bull creation is where Brodie got her name from Rocco. Eric explains the project that is being created for the qualifier...A beat machine of some sort... Sounds pretty awesome! If anyone wants to solder this weekend, we are going to have a soldering party this weekend! we have to produce a video, including public display.<br />
<br />
''Eric wants to request about $400 to help with expenses for this''<br />
<br />
''Nate B Motions for expenses to be paid up to $500 with i3Detroit funds, provided all receipts are turned in to the treasurer.''<br />
<br />
''6 in favor<br />
<br />
<br />
None opposed<br />
<br />
<br />
<br />
motion carries''<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
==New Business==<br />
Matt O- the next iteration of bob ross is happening may 18th, and it’s going to be all-out. 3 classes all day long. $25 for short session and $35 for the longer sessions.<br />
<br />
Steve Hermann - something happened to the grinder. the wheel on the tool grinder was plugged with aluminum. hard wheel grinder don’t <br />
<br />
''Cameras need to be finished, because we need to find out who is ruining tools''<br />
<br />
'''Potlock prep and task review'''<br />
<br />
''May 11th <br />
come see Maddy get drunk and use a power drill!!''<br />
<br />
''Nate B goes over the to-do list for potlock, and carries into after the meeting.''<br />
<br />
Nate B - Everyone can help!<br />
<br />
Ted- Oh Boy!<br />
<br />
<br />
end 8:11<br />
<br />
[[Category:Meeting Minutes]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Board_Meeting_Minutes_20130409Board Meeting Minutes 201304092013-04-10T04:42:50Z<p>Nate lapt: </p>
<hr />
<div>[[Category:Meeting Minutes]]<br />
<br />
April 9th 2013<br />
<br />
Chair: Dustin White<br />
<br />
Start 7:30pm<br />
<br />
<br />
'''Attendance:'''<br />
<br />
Matt Oehrlein<br />
<br />
Dave Scholl<br />
<br />
Sean Denny<br />
<br />
Nate Bezanson<br />
<br />
Roger Slykhouse<br />
<br />
Ted Hansen<br />
<br />
Adrienne Patterson<br />
<br />
Greg Smith<br />
<br />
Dusting White<br />
<br />
Ed <unreadable><br />
<br />
Steve Brook<br />
<br />
Michael Fink<br />
<br />
David Dixon<br />
<br />
Marie Enga<br />
<br />
Nate Warnick<br />
<br />
<br />
==Lease renewal==<br />
Dustin: 5 year lease with a 1 year “out” we will pay $2130/mo this year. After first year, we will switch to the lower of the two: 5% or a CPI increase.<br />
==John’s son’s membership/employees==<br />
Dustin: John would like for his son to have a free membership in addition to john’s free membership. He also wanted to discuss a deal for his employee’s at a discounted rate, but have some kind of limited membership, during business hours only, or something.<br />
<br />
Nate B: is his son in the lease?<br />
<br />
Dustin: No<br />
<br />
Nate B: Does he get a “does not need to be on the mailing list magical token?”<br />
<br />
Dustin: no<br />
<br />
Nate B: I disagree. If someone is going to be using the tools, they need to be on the mailing list and need to follow the rules like any other member<br />
<br />
Ted: _concurs_<br />
<br />
Dustin: Okay, we will put him on the mailing list. Chances are we won’t even see him.<br />
<br />
Ted/Nate B: We need to make sure he obeys the same rules as any paying member also does. This implies being in contact and whatever else.<br />
<br />
Nate B: I want to be clear that “following the rules” means “communicating”. Should we run the lease by a lawyer?<br />
<br />
Dustin: It’s pretty light on the legalese. It reads like English.<br />
<br />
Ted: Could you send the lease to the board before we sign it?<br />
<br />
Brodie: I can and will read through it<br />
<br />
Nate B: was the front door mentioned during lease negotiations?<br />
<br />
Dustin: no.<br />
<br />
Ted: I think we can reasonably dismiss the door because it is an insignificant fraction of the building’s net value.<br />
<br />
Nate B: what’s the deal with 5 years?<br />
<br />
Dustin: That was the stipulation for keeping the rent low. We still have 1 year to leave.<br />
<br />
Nate B: and we also have an automatic “out” at the end of 5 year. And this lease I in place for 5 years.<br />
<br />
Dustin: Correct. I will let you know when we get the lease back from him.<br />
<br />
==T-shirt prepay/storage==<br />
Greg: Per what we’ve done, I’ve talked to previous suppliers. I put together a list of 120 shirts, both black and grey <lists sizes>. The prices are $5.10 each, except larger shirts are $7. It totals to $672. The other bid total was $902. We have 6 sizes, we can’t just throw them all in one bin, we need some way of organizing them.<br />
<br />
Nate B: I have a suggestion: the little white wire mesh storage cubes work well, and bigger plastic bins for bulk storage. How many of these shirts are spoken for?<br />
<br />
Greg: None of them are spoken for.<br />
<br />
Nate B: So these are all impulse purchases, make sure we can display them somewhere, so people want to buy them during the tours.<br />
<br />
Greg: okay.<br />
<br />
Nate W: Matt O. talked to the henry ford, and we are allowed to display and sell them at maker faire.<br />
<br />
Karen: Can we get girly tees/fitted tees? I think they would sell. <br />
<br />
Ted: okay greg, bump it up to 200, and add some women’s sizes.<br />
<br />
Karen: Go for the charcoal grey.<br />
<br />
_some ramblings about how storing and how dusty this place is_<br />
<br />
Greg: I suggest a price of $10 here, $15 at maker faire. Okay. I will go ahead and order.<br />
<br />
Ted: reimburse greg for $1200 for t-shirts? <br />
<br />
_motion passes_<br />
==Flooring==<br />
Nate B: John seemed surprised when he saw the floor was painted. We should probably finish the job. It looks like work in progress.<br />
<br />
Nate W: Estimate to do the whole floor is $500.<br />
<br />
Ted: is this worth doing?<br />
<br />
Nate B: the reason I asked for this to be on the agenda, we are now committed to this being done. We should at least paint under the things that haven’t been moved, and then it’s a vote able item whether we do more.<br />
<br />
Ted: I weary of setting a precedent that people can just do flooring and then expect to get money for it. Nate W, do you understand that you may not get reimbursed for it?<br />
<br />
Nate W: yes.<br />
<br />
Nate B: but $500 doesn’t include the cleaner and the prep, so lets keep in mind how much oil is in this concrete. We’ve always previously concluded that we didn’t have the resources to paint the whole floor and make the paint stick.<br />
<br />
Ted: Keep in mind this is not real epoxy paint. This stuff will wear through in a year. It looks good, but won’t last a super long time. It might be worth doing for $500, but we will have to touch it up after a bit. Sooo, no conclusion.<br />
<br />
Nate B: I just want to make sure that we have to finish the parts that have been started.<br />
<br />
Ted: okay, and we can decide if we want to finish the whole shop at the next member meeting.<br />
==Extinguishers==<br />
Ted: Extinguishers are done. If anyone knows who owns the foamy one, take it home, otherwise I will give it away. Beyond what was recommended by the inspection company, we added one by wolverine (laser cutter) and kiln. <br />
<br />
Dustin: Can I buy an extinguisher from home depot and bring it in here?<br />
<br />
Ted: It has to be certified. So it should come with a certification.<br />
<br />
==Additional Business==<br />
Nate B: I plan on buying someone a membership for someone whomever wins the arduino contest thing I am doing<br />
<br />
Dustin: I will contribute ½ of that month.<br />
<br />
Ted: Bring this up at the member meeting, it’s likely we will reimburse you at the member meeting.</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Lost_and_Found_/_GraveyardLost and Found / Graveyard2013-04-06T04:46:16Z<p>Nate lapt: </p>
<hr />
<div>== Graveyard ==<br />
<br />
The Graveyard is located between the shop entrance and the large bay door. The purpose of the Graveyard is to provide a warehouse of items available to salvage by members. <br />
Dispose of oldest/most useless items when over full.<br />
<br />
* '''Do not bring items to i3Detroit specifically for the graveyard'''. Use the [[Virtual Graveyard]] on this here wiki if you want to post items for other members to take off your hands.<br />
* Items may be placed in the graveyard by their owners, if the item was already stored at i3 in plots or with Parking Permit, or by any member if the item was in Lost and Found for at least a month<br />
* Items in the graveyard must be dated so that old items can be cleaned out periodically.<br />
* Items must fit on the shelves. If it doesn't fit, you can make room by disposing of other items.<br />
* Keep the Graveyard full. If space is needed for new items, any member may dispose of older items.<br />
* Do not place things you do not own directly into the Graveyard, no matter how offended you are by them, unless they are coming from Lost and Found.<br />
* Any member may take possession of anything from the graveyard at any time. Member must then handle it as private property, including proper storage and permits, if needed.<br />
* If an item is known to work or be broken, label as such<br />
* Items in Special Handling areas of the Graveyard should be disposed of by the approved Special Handling. Items in the general area of the Graveyard will be disposed of by Dumpster. Special Handling areas of the Graveyard are clearly marked.<br />
<br />
== Lost and Found ==<br />
<br />
Lost and Found is located <strike>on top of the storage cabinet under the cork board at the very front of the shop.</strike><br />
<br />
* Unless claimed, the ultimate destination of an item placed in Lost and Found is disposal, either by Dumpster or off-site disposal. Only place items in Lost and Found which are intended for Disposal if unclaimed.<br />
* Only items with expired Parking Tickets may be placed in the Lost and Found. Items with expired Parking Tickets should be placed into Lost and Found by the "Finder" listed on the Parking Ticket.<br />
* Label found items with date and location found.<br />
* Items must remain in Lost and Found for a minimum of one month afterwhich they can be moved to the Graveyard by any member.<br />
* There are two shelves, "even months" and "odd months", referring to the month when item was found<br />
* Any member placing an item in Lost and Found will again try to inform the owner<br />
** Communicate privately if possible<br />
** Post to the list when the owner is unknown<br />
** include "[Placed in Lost and Found]" in the subject line<br />
[[Category:Facility Information]][[Category:Organization Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Category:NetworkingCategory:Networking2013-04-03T03:39:11Z<p>Nate lapt: /* IP Addresses in use */</p>
<hr />
<div>= Wireless Network =<br />
<br />
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment). <br />
<br />
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.<br />
<br />
<br />
= LAN Addresses =<br />
<br />
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.<br />
<br />
<br />
== Subnet: 10.13.0.0/24 ==<br />
<br />
<br />
=== Static Hosts ===<br />
<br />
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change. <BR><BR>Most member and guest laptops, however, do not need one of these.<br />
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.<br />
<BR><br />
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.<br />
<BR><br />
<br />
'''Static hosts use the following settings:'''<br />
<br />
{|<br />
|-<br />
| IP address<br />
| Take an unused address from the table below. Document which address you used. When in doubt, ping first.<br />
|-<br />
| Subnet mask<br />
| 255.255.255.0<br />
|-<br />
| Default Gateway<br />
| 10.13.0.1<br />
|-<br />
| DNS Server<br />
| 10.13.0.1<br />
|-<br />
| DNS domain name<br />
| i3detroit.local<br />
|-<br />
| Time / NTP server<br />
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)<br />
|}<br />
<br />
<BR><BR><br />
<br />
=== IP Addresses in use === <br />
{|<br />
|-<br />
! Address <br />
! Host <br />
! Description <br />
! Admin(s)<br />
|-<br />
| 10.13.0.1 <br />
| pfsense <br />
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.<br />
|-<br />
| 10.13.0.5<br />
| [[i3switch01]]<br />
| This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.6<br />
| Cisco 1130 AP i3DetroitAP01<br />
| This is primary access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.7<br />
| Cisco 1130 i3DetroitAP02<br />
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.8 <br />
| Asterisk <br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
Going Away<br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.9 <br />
| Asterisk VM<br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.10<br />
| [[Wireless LAN Controller]]<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.11<br />
| [[Wireless LAN Controller]] IP #2 (required)<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.13 <br />
| Camera Server - This can be re-purposed <br />
| Big brother is watching you. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.14<br />
| Cisco 1130 i3DetroitAP03<br />
| This is the back-of-shop access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.15 <br />
| i3Debian - Skynet<br />
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical<br />
Going away!! <br />
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross<br />
|-<br />
| 10.13.0.16 <br />
| ESXI<br />
| VMWare ESXI<br />
| [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.17 <br />
| Skynet - VM<br />
| "The Ubuntu Box" Runs the Twitter internal scripts <br />
| Ted, [[User:Nate_lapt| NateW]], Matt O<br />
|-<br />
| 10.13.0.30<br />
| OpenAccess Control 3.0<br />
| New (still future) rfid entry system<br />
| Evan Allen<br />
|-<br />
| 10.13.0.40<br />
| [[i3Switch02]]<br />
| i3 Second managed Ethernet switch in rack<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.50 <br />
| Plotter <br />
| [[HOWTO use the Plotter|The HP DesignJet 300 ]] <br />
| Roger, Rocco?<br />
|-<br />
| 10.13.0.51 <br />
| Laserjet-5si <br />
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area <br />
| Rocco<br />
|-<br />
| 10.13.0.53 <br />
| Color LaserJet 4650n <br />
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]]n printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.54<br />
| Color LaserJet 4650dn <br />
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.62<br />
| CLP-620ND<br />
| Big color laser printer<br />
| Nate B<br />
|-<br />
| 10.13.0.75<br />
| Project 1<br />
| A super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.76<br />
| Project 2<br />
| Another super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.90 <br />
| First-Cam <br />
| The Axis 206 network camera over the FIRST corner. <br />
| Ted, [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.91<br />
| Polycom-ATA<br />
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken'' <br />
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.99 <br />
| printer<br />
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack. <br />
| NateB<br />
|-<br />
| 10.13.0.100-245<br />
| DHCP RANGE <br />
| This is the DHCP range handed out by the firewall. Reservations possible<br />
|}<br />
<br />
= DNS =<br />
<br />
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.<br />
<br />
= FAQ =<br />
<br />
Q: Can we open a port in the firewall for my XYZ server? <br />
<br />
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.<br />
<br />
Q: Let's get some better bandwidth at the space! <br />
<br />
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.<br />
<br />
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn? <br />
<br />
:A: Kid, you are up past your bedtime.<br />
<br />
[[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2013-03-28T19:31:53Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
<br />
|-<br />
| Zoned motion office Lighting<br />
| Source some ultrasonic motion detectors.<br />
|<br />
| $100-300<br />
|-<br />
| Organize<br />
| Remove clutter/fire/tripping/where does this go hazards from floor and aisle ways<br />
|<br />
|<br />
|-<br />
| Metal shop cord reel has extension cord<br />
| Remove, run conduit and outlet double-gang box.<br />
|<br />
|<br />
|-<br />
| Whiteboard room clutter<br />
| CLEAN AND ORGANIZE!!<br />
|<br />
|<br />
|-<br />
| Welding light has extension cord<br />
| Remove, run new outlet within reach of lights<br />
|<br />
|<br />
|-<br />
| light over bay<br />
| Remove extension cord, run new outlet to light<br />
|<br />
|<br />
|-<br />
| Fire extinguishers<br />
| Renew<br />
|<br />
|<br />
|-<br />
| Metal shop fan<br />
| fix or remove<br />
|<br />
|<br />
|-<br />
| Rehang the welding curtain so it juuuust touches the ground.<br />
|<br />
|<br />
|<br />
|-<br />
| Affix chainlink fence or other material around dust collector chain area<br />
|<br />
|<br />
|<br />
|-<br />
| Remove extension cords from ceiling beams, tidy up the overhead situation in general<br />
|<br />
|<br />
|<br />
|-<br />
| Change the oil in the air compressor<br />
|<br />
|<br />
|<br />
|-<br />
| Reaffix lights to kitchen ceiling<br />
|<br />
|<br />
|<br />
|-<br />
| Finish edges of e-room carpet<br />
| <br />
|<br />
|<br />
|-<br />
| Build electronic crashbar for front door<br />
|<br />
|<br />
|<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Finish forklift repair<br />
|Install protection for vulnerable wiring harness, etc.?<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|Juki and lights have left, Jointer?<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|install more-closely-spaced vertical dividers in wood shop sheet storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build 3 lockable money boxes</strike><br />
| 3 done<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|Rebuild Miter Saw Stand and Bench<br />
|Saving floor Space<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>Build wood shop machine cart</strike><br />
|All tools on Carts<br />
|<br />
|<br />
|-<br />
|Remove stored wood from machine shop loft, cull/sort stored metal<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Install Casters on Wood Shop router table</strike><br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2013-03-28T18:51:53Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
<br />
|-<br />
| Organize<br />
| Remove clutter/fire/tripping/where does this go hazards from floor and isle ways<br />
|<br />
|<br />
|-<br />
| Metal shop cord reel has extension cord<br />
| Remove, run conduit and outlet gang box.<br />
|<br />
|<br />
|-<br />
| Whiteboard room clutter<br />
|<br />
|<br />
|<br />
|-<br />
| Welding light has extension cord<br />
|<br />
|<br />
|<br />
|-<br />
| light over bay<br />
|<br />
|<br />
|<br />
|-<br />
| Fire extinguishers<br />
|<br />
|<br />
|<br />
|-<br />
| Metal shop fan - fix or remove<br />
|<br />
|<br />
|<br />
|-<br />
| Rehang the welding curtain so it juuuust touches the ground.<br />
|<br />
|<br />
|<br />
|-<br />
| Affix chainlink fence or other material around dust collector chain area<br />
|<br />
|<br />
|<br />
|-<br />
| Remove extension cords from ceiling beams, tidy up the overhead situation in general<br />
|<br />
|<br />
|<br />
|-<br />
| Change the oil in the air compressor<br />
|<br />
|<br />
|<br />
|-<br />
| Reaffix lights to kitchen ceiling<br />
|<br />
|<br />
|<br />
|-<br />
| Finish edges of e-room carpet<br />
| <br />
|<br />
|<br />
|-<br />
| Build electronic crashbar for front door<br />
|<br />
|<br />
|<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Finish forklift repair<br />
|Install protection for vulnerable wiring harness, etc.?<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|Juki and lights have left, Jointer?<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|install more-closely-spaced vertical dividers in wood shop sheet storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build 3 lockable money boxes</strike><br />
| 3 done<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|Rebuild Miter Saw Stand and Bench<br />
|Saving floor Space<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>Build wood shop machine cart</strike><br />
|All tools on Carts<br />
|<br />
|<br />
|-<br />
|Remove stored wood from machine shop loft, cull/sort stored metal<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Install Casters on Wood Shop router table</strike><br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2013-03-28T18:49:05Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
<br />
|-<br />
| Whiteboard room clutter<br />
|<br />
|<br />
|<br />
|-<br />
| Welding light has extension cord<br />
|<br />
|<br />
|<br />
|-<br />
| light over bay<br />
|<br />
|<br />
|<br />
|-<br />
| Fire extinguishers<br />
|<br />
|<br />
|<br />
|-<br />
| Metal shop fan - fix or remove<br />
|<br />
|<br />
|<br />
|-<br />
| Rehang the welding curtain so it juuuust touches the ground.<br />
|<br />
|<br />
|<br />
|-<br />
| Affix chainlink fence or other material around dust collector chain area<br />
|<br />
|<br />
|<br />
|-<br />
| Remove extension cords from ceiling beams, tidy up the overhead situation in general<br />
|<br />
|<br />
|<br />
|-<br />
| Change the oil in the air compressor<br />
|<br />
|<br />
|<br />
|-<br />
| Reaffix lights to kitchen ceiling<br />
|<br />
|<br />
|<br />
|-<br />
| Finish edges of e-room carpet<br />
| <br />
|<br />
|<br />
|-<br />
| Build electronic crashbar for front door<br />
|<br />
|<br />
|<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Finish forklift repair<br />
|Install protection for vulnerable wiring harness, etc.?<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|Juki and lights have left, Jointer?<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|install more-closely-spaced vertical dividers in wood shop sheet storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build 3 lockable money boxes</strike><br />
| 3 done<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|Rebuild Miter Saw Stand and Bench<br />
|Saving floor Space<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>Build wood shop machine cart</strike><br />
|All tools on Carts<br />
|<br />
|<br />
|-<br />
|Remove stored wood from machine shop loft, cull/sort stored metal<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Install Casters on Wood Shop router table</strike><br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=WelcomeSwitchWelcomeSwitch2013-03-28T15:22:57Z<p>Nate lapt: </p>
<hr />
<div>THIS CODE IS OBSOLETE,<br />
NEW SCRIPT IS RUNNING IN PYTHON. <br />
PENDING AN UPDATE HERE.<br />
<br />
==Wiring==<br />
<br />
On the camera, there's a hacked-up PoE cable that does the following:<br />
<pre><br />
1 wht/org ethernet<br />
2 org/wht ethernet<br />
3 wht/grn ethernet<br />
4 blu/wht GND, also Digital Input -<br />
5 wht/blu Digital Input +<br />
6 grn/wht ethernet<br />
7 wht/brn Relay Output<br />
8 brn/wht +12V, also Relay Input<br />
</pre><br />
<br />
This allows the camera to be positioned away from the door by running a single cable. Without this, you'd need one for power, one for network, AND one for the I/O pins. Using a single 24ga wire for power is suboptimal, but the camera doesn't draw much power, and it hasn't been an issue yet. <br />
<br />
In the box above the door:<br />
Ethernet pins pass through to Ethernet input (into which is plugged the feed from the back of the space.)<br />
GND from power input goes to GND from camera, also to LED cathode and SSR negative.<br />
+12 from power input goes to +12 from camera, also to switch contact.<br />
Relay Output from camera goes to LED anode and SSR positive.<br />
Digtal Input + from camera goes to switch contact. SSR isn't currently connected; signals are on orange wires, shrinkwrapped to prevent shorts in the time being.<br />
<br />
(To accommodate a future local OPEN sign, provision has been made for connecting the big solid-state relay, which can switch anything we could throw at it.)<br />
<br />
Software<br />
<br />
The most important part of all this! Camera documentation: [ftp://ftp.dlink.com/Multimedia/URL%20Commands/URL%20command%20for%20DCS-5300_G_,%20DCS-2100_G_%2B,%20DCS-2000,%20DVS-301_2007_06_01.pdf]<br />
<br />
<br />
==Proof-of-concept batch file:==<br />
<pre><br />
:top<br />
del getdi.cgi<br />
wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/getdi.cgi<br />
find "DI=L" <getdi.cgi<br />
echo %errorlevel%<br />
if %errorlevel% EQU 0 wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/setdo.cgi?do=l --output-document=NUL<br />
rem This turns the LED off when the switch is down.<br />
find "DI=H" <getdi.cgi<br />
echo %errorlevel%<br />
if %errorlevel% EQU 0 wget --user=port --password=port http://i3detroit.dyndns.org:5000/cgi-bin/setdo.cgi?do=h --output-document=NUL<br />
rem This turns the LED on when the switch is up. <br />
sleep 1<br />
goto top<br />
</pre><br />
<br />
Updated batch file, this is the one currently running on nate's desktop at home:<br />
<pre><br />
echo off<br />
rem set currentstate=off<br />
set camerahost=i3detroit.dyndns.org:5000<br />
set camerauser=port<br />
set camerapass=port<br />
set twitteruser=contact@i3detroit.com<br />
set twitterpass=redacted-from-wiki<br />
<br />
:begin<br />
del getdi.cgi<br />
wget --user=%camerauser% --password=%camerapass% --timeout=5 --tries=2 http://%camerahost%/cgi-bin/getdi.cgi<br />
find "DI=H" <getdi.cgi<br />
echo %errorlevel%<br />
if %errorlevel% EQU 0 goto itson<br />
find "DI=L" <getdi.cgi<br />
echo %errorlevel%<br />
if %errorlevel% EQU 0 goto itsoff<br />
<br />
:loop<br />
sleep 10<br />
goto begin<br />
<br />
:itson<br />
echo It's on!<br />
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/setdo.cgi?do=h --output-document=NUL<br />
if "%currentstate%" EQU "on" goto loop<br />
set currentstate=on<br />
echo Switch set to ON state, %time% %date% >> log<br />
rem wget --user=%twitteruser% --password=%twitterpass% --post-data="status=The space is OPEN FOR GUESTS as of %time%, please drop in!" http://twitter.com/statuses/update.xml --output-document=NUL<br />
del video.jpg<br />
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/video.jpg<br />
curl --form username=%twitteruser% --form password=%twitterpass% --form media=@video.jpg --form-string "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?" http://twitpic.com/api/uploadAndPost<br />
goto loop<br />
<br />
:itsoff<br />
echo It's off!<br />
if "%currentstate%" EQU "off" goto loop<br />
set currentstate=off<br />
echo Switch set to OFF state, %time% %date% >> log<br />
wget --user=%twitteruser% --password=%twitterpass% --post-data="status=The space is closed as of %time% %date%" http://twitter.com/statuses/update.xml --output-document=NUL<br />
wget --user=%camerauser% --password=%camerapass% --timeout=5 http://%camerahost%/cgi-bin/setdo.cgi?do=l --output-document=NUL<br />
goto loop<br />
</pre><br />
<br />
==WelcomeSwitch 1.4==<br />
Replacement perl script. Running on the pfsense box in the space.<br />
<b>(OUTDATED, NEW SCRIPT BELOW)</b><br />
<pre><br />
#!/usr/bin/perl -w<br />
<br />
my($camerauser, $camerapass, $twit_user, $twit_pass) = @ARGV;<br />
<br />
my $tries = 2;<br />
my $camerahost = 'xx.xx.xx.xx';<br />
my $switchurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/getdi.cgi";<br />
my $pictureurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/video.jpg";<br />
my $twit_url = "http://twitpic.com/api/uploadAndPost";<br />
my $status_filename = 'doorbot_status';<br />
<br />
my $open_post_text = "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?";<br />
my $close_post_text = "The space is closed as of";<br />
<br />
my $old_switch_state = undef;<br />
<br />
<br />
$SIG{'INT'} = \&quit;<br />
$SIG{'QUIT'} = \&quit;<br />
<br />
sub setOutput<br />
{<br />
my($value) = @_;<br />
<br />
my $url = "http://$camerauser:$camerapass\@$camerahost/cgi-bin/setdo.cgi?do=$value";<br />
my $result = `wget -q --tries=$tries --output-document=setdo.html $url`;<br />
<br />
open(my $fh, '>', $status_filename) or return;<br />
my $status = ($value eq 'h') ? "open" : "closed";<br />
print $fh $status;<br />
close $fh;<br />
}<br />
<br />
while (1)<br />
{<br />
$cameraresponse = `curl -s $switchurl`;<br />
chomp $cameraresponse;<br />
# print "camera response is: $cameraresponse\n";<br />
<br />
$cameraresponse =~ /DI=(.)/;<br />
$new_switch_state = $1;<br />
<br />
if($new_switch_state)<br />
{<br />
if(defined $old_switch_state and $new_switch_state eq $old_switch_state)<br />
{<br />
#no change<br />
next;<br />
}<br />
<br />
if($new_switch_state eq 'H')<br />
{<br />
print "camera input is high\n";<br />
<br />
#get the picture<br />
my $picture_file_name = 'doorpicture.jpg';<br />
`curl -s --output $picture_file_name $pictureurl`;<br />
<br />
next if $?;<br />
<br />
#make the twitter post<br />
my $twit_post_command = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',<br />
$twit_user, $twit_pass, $picture_file_name, $open_post_text, $twit_url;<br />
#print "twit_post_command " . $twit_post_command . "\n" ;<br />
<br />
#print "posting picture to twitter\n";<br />
`$twit_post_command`;<br />
next if $?;<br />
<br />
unlink($picture_file_name);<br />
<br />
setOutput('h');<br />
}<br />
elsif ($new_switch_state eq 'L')<br />
{<br />
print "camera input is low\n";<br />
<br />
my $timestamp = scalar(localtime);<br />
<br />
#make the twitter post<br />
my $twit_url = 'http://twitter.com/statuses/update.xml';<br />
my $twit_post_command = qq(wget -q --tries=$tries --user=$twit_user --password=$twit_pass --post-data="status=$close_post_text $timestamp" $twit_url --output-document=/dev/null);<br />
#my $twit_post_command = qq(curl -s --form "username=$twit_user" --form "password=$twit_pass" --form-string "status=$close_post_text $timestamp" $twit_url);<br />
`$twit_post_command`;<br />
next if $?;<br />
<br />
setOutput('l');<br />
}<br />
<br />
$old_switch_state = $new_switch_state;<br />
}<br />
else<br />
{<br />
#camera input is unknown<br />
}<br />
}<br />
continue<br />
{<br />
sleep 10;<br />
}<br />
<br />
&quit;<br />
<br />
<br />
sub quit<br />
{<br />
print "doorbot sez adios!\n";<br />
unlink($status_filename);<br />
exit;<br />
}<br />
</pre><br />
<br />
<br />
<br />
==Welcome Switch 1.7 *Current Build*==<br />
Running on the Debian box 10.13.0.15 <br><br />
Current Build: myselfbot.pl <br><br />
<br />
To start script: <br><br />
"/usr/bin/perl -w myselfbot.pl H &" Open <br><br />
"/usr/bin/perl -w myselfbot.pl L &" Closed<br />
<br><br><br />
Current Open status <br><br />
H = Open<br><br />
L = Closed<br><br />
<br />
<pre><br />
#!/usr/bin/perl -w<br />
<br />
<br />
my($old_switch_state) = @ARGV;<br />
<br />
#my($camerauser, $camerapass, $twit_user, $twit_pass) = ('port', 'port', 'Test2859258798', 'CONTACT-ADMIN');<br />
my($camerauser, $camerapass, $twit_user, $twit_pass) = ('port', 'port', 'i3detroit', 'CONTACT-ADMIN');<br />
<br />
my $tries = 2;<br />
my $camerahost = '10.13.0.2';<br />
my $switchurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/getdi.cgi";<br />
my $pictureurl = "http://$camerauser:$camerapass@" . "$camerahost/cgi-bin/video.jpg";<br />
my $twit_url = "http://twitpic.com/api/uploadAndPost";<br />
my $status_filename = 'doorbot_status';<br />
<br />
my $open_post_text = "message=The space is OPEN FOR GUESTS, and here's who flipped the switch! Drop in?";<br />
my $closed_post_text = "message=The space is CLOSED, please check back later!";<br />
<br />
<br />
$SIG{'INT'} = \&quit;<br />
$SIG{'QUIT'} = \&quit;<br />
<br />
sub setOutput<br />
{<br />
my($value) = @_;<br />
<br />
my $url = "http://$camerauser:$camerapass\@$camerahost/cgi-bin/setdo.cgi?do=$value";<br />
my $result = `wget -q --tries=$tries --output-document=/dev/null $url`;<br />
<br />
open(my $fh, '>', $status_filename) or return;<br />
my $status = ($value eq 'h') ? "open" : "closed";<br />
print $fh localtime() . ' ' . $status;<br />
close $fh;<br />
}<br />
<br />
while (1)<br />
{<br />
$cameraresponse = `curl -s $switchurl`;<br />
chomp $cameraresponse;<br />
# print "camera response is: $cameraresponse\n";<br />
<br />
$cameraresponse =~ /DI=(.)/;<br />
$new_switch_state = $1;<br />
<br />
if($new_switch_state)<br />
{<br />
if(defined $old_switch_state and $new_switch_state eq $old_switch_state)<br />
{<br />
#no change<br />
next;<br />
}<br />
<br />
if($new_switch_state eq 'H')<br />
{<br />
print localtime() . " camera input is high\n";<br />
<br />
#get the picture<br />
my $picture_file_name = 'doorpicture.jpg';<br />
`curl -s --output $picture_file_name $pictureurl`;<br />
<br />
next if $?;<br />
<br />
#make the twitter post<br />
my $twit_post_command = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',<br />
$twit_user, $twit_pass, $picture_file_name, $open_post_text, $twit_url;<br />
#print "twit_post_command " . $twit_post_command . "\n" ;<br />
<br />
#print "posting picture to twitter\n";<br />
`$twit_post_command`;<br />
next if $?;<br />
<br />
unlink($picture_file_name);<br />
<br />
setOutput('h');<br />
}<br />
elsif ($new_switch_state eq 'L')<br />
{<br />
print localtime() . " camera input is low\n";<br />
<br />
my $timestamp = scalar(localtime);<br />
<br />
my $picture_file_name2 = '/home/i3/doorbot/closed/riverview-sign-pool-closed-usg.jpg';<br />
#my $picture_file_name2 = '/home/i3/doorbot/closed.jpg';<br />
#make the twitter post<br />
my $twit_post_command2 = sprintf 'curl -s --form "username=%s" --form "password=%s" --form "media=@%s" --form-string "%s" %s',<br />
$twit_user, $twit_pass, $picture_file_name2, $closed_post_text, $twit_url;<br />
#print "twit_post_command2 " . $twit_post_command2 . "\n" ;<br />
<br />
#print "posting picture to twitter\n";<br />
`$twit_post_command2`;<br />
<br />
<br />
#unlink($picture_file_name2);<br />
<br />
next if $?;<br />
<br />
setOutput('l');<br />
}<br />
<br />
$old_switch_state = $new_switch_state;<br />
sleep 10;<br />
}<br />
else<br />
{<br />
#camera input is unknown<br />
}<br />
}<br />
continue<br />
{ <br />
sleep 2;<br />
}<br />
<br />
&quit;<br />
<br />
<br />
sub quit<br />
{<br />
print localtime() . " doorbot sez adios!\n";<br />
unlink($status_filename);<br />
exit;<br />
}<br />
<br />
</pre><br />
[[Category:Projects]][[Category:Member Projects]][[Category:Completed Projects]][[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Category:NetworkingCategory:Networking2013-03-16T20:31:24Z<p>Nate lapt: /* IP Addresses in use */</p>
<hr />
<div>= Wireless Network =<br />
<br />
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment). <br />
<br />
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.<br />
<br />
<br />
= LAN Addresses =<br />
<br />
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.<br />
<br />
<br />
== Subnet: 10.13.0.0/24 ==<br />
<br />
<br />
=== Static Hosts ===<br />
<br />
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change. <BR><BR>Most member and guest laptops, however, do not need one of these.<br />
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.<br />
<BR><br />
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.<br />
<BR><br />
<br />
'''Static hosts use the following settings:'''<br />
<br />
{|<br />
|-<br />
| IP address<br />
| Take an unused address from the table below. Document which address you used. When in doubt, ping first.<br />
|-<br />
| Subnet mask<br />
| 255.255.255.0<br />
|-<br />
| Default Gateway<br />
| 10.13.0.1<br />
|-<br />
| DNS Server<br />
| 10.13.0.1<br />
|-<br />
| DNS domain name<br />
| i3detroit.local<br />
|-<br />
| Time / NTP server<br />
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)<br />
|}<br />
<br />
<BR><BR><br />
<br />
=== IP Addresses in use === <br />
{|<br />
|-<br />
! Address <br />
! Host <br />
! Description <br />
! Admin(s)<br />
|-<br />
| 10.13.0.1 <br />
| pfsense <br />
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.<br />
|-<br />
| 10.13.0.5<br />
| [[i3switch01]]<br />
| This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.6<br />
| Cisco 1130 AP i3DetroitAP01<br />
| This is primary access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.7<br />
| Cisco 1130 i3DetroitAP02<br />
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.8 <br />
| Asterisk <br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.9 <br />
| Asterisk VM<br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.10<br />
| [[Wireless LAN Controller]]<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.11<br />
| [[Wireless LAN Controller]] IP #2 (required)<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.13 <br />
| Camera Server - This can be re-purposed <br />
| Big brother is watching you. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.14<br />
| Cisco 1130 i3DetroitAP03<br />
| This is the back-of-shop access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.15 <br />
| i3Debian - Skynet<br />
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical <br />
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross<br />
|-<br />
| 10.13.0.16 <br />
| ESXI<br />
| VMWare ESXI<br />
| [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.40<br />
| [[i3Switch02]]<br />
| i3 Second managed Ethernet switch in rack<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.50 <br />
| Plotter <br />
| [[HOWTO use the Plotter|The HP DesignJet 300 ]] <br />
| Roger, Rocco?<br />
|-<br />
| 10.13.0.51 <br />
| Laserjet-5si <br />
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area <br />
| Rocco<br />
|-<br />
| 10.13.0.53 <br />
| Color LaserJet 4650n <br />
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]]n printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.54<br />
| Color LaserJet 4650dn <br />
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.62<br />
| CLP-620ND<br />
| Big color laser printer<br />
| Nate B<br />
|-<br />
| 10.13.0.75<br />
| Project 1<br />
| A super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.76<br />
| Project 2<br />
| Another super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.90 <br />
| First-Cam <br />
| The Axis 206 network camera over the FIRST corner. <br />
| Ted, [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.91<br />
| Polycom-ATA<br />
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken'' <br />
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.99 <br />
| printer<br />
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack. <br />
| NateB<br />
|-<br />
| 10.13.0.100-245<br />
| DHCP RANGE <br />
| This is the DHCP range handed out by the firewall. Reservations possible<br />
|}<br />
<br />
= DNS =<br />
<br />
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.<br />
<br />
= FAQ =<br />
<br />
Q: Can we open a port in the firewall for my XYZ server? <br />
<br />
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.<br />
<br />
Q: Let's get some better bandwidth at the space! <br />
<br />
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.<br />
<br />
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn? <br />
<br />
:A: Kid, you are up past your bedtime.<br />
<br />
[[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Category:NetworkingCategory:Networking2013-03-15T05:07:29Z<p>Nate lapt: /* IP Addresses in use */</p>
<hr />
<div>= Wireless Network =<br />
<br />
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment). <br />
<br />
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.<br />
<br />
<br />
= LAN Addresses =<br />
<br />
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.<br />
<br />
<br />
== Subnet: 10.13.0.0/24 ==<br />
<br />
<br />
=== Static Hosts ===<br />
<br />
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change. <BR><BR>Most member and guest laptops, however, do not need one of these.<br />
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.<br />
<BR><br />
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.<br />
<BR><br />
<br />
'''Static hosts use the following settings:'''<br />
<br />
{|<br />
|-<br />
| IP address<br />
| Take an unused address from the table below. Document which address you used. When in doubt, ping first.<br />
|-<br />
| Subnet mask<br />
| 255.255.255.0<br />
|-<br />
| Default Gateway<br />
| 10.13.0.1<br />
|-<br />
| DNS Server<br />
| 10.13.0.1<br />
|-<br />
| DNS domain name<br />
| i3detroit.local<br />
|-<br />
| Time / NTP server<br />
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)<br />
|}<br />
<br />
<BR><BR><br />
<br />
=== IP Addresses in use === <br />
{|<br />
|-<br />
! Address <br />
! Host <br />
! Description <br />
! Admin(s)<br />
|-<br />
| 10.13.0.1 <br />
| pfsense <br />
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.<br />
|-<br />
| 10.13.0.5<br />
| [[i3switch01]]<br />
| This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.6<br />
| Cisco 1130 AP i3DetroitAP01<br />
| This is primary access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.7<br />
| Cisco 1130 i3DetroitAP02<br />
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.8 <br />
| Asterisk <br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.10<br />
| [[Wireless LAN Controller]]<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.11<br />
| [[Wireless LAN Controller]] IP #2 (required)<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.13 <br />
| Camera Server - This can be re-purposed <br />
| Big brother is watching you. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.14<br />
| Cisco 1130 i3DetroitAP03<br />
| This is the back-of-shop access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.15 <br />
| i3Debian - Skynet<br />
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical <br />
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross<br />
|-<br />
| 10.13.0.16 <br />
| ESXI<br />
| VMWare ESXI<br />
| [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.40<br />
| [[i3Switch02]]<br />
| i3 Second managed Ethernet switch in rack<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.50 <br />
| Plotter <br />
| [[HOWTO use the Plotter|The HP DesignJet 300 ]] <br />
| Roger, Rocco?<br />
|-<br />
| 10.13.0.51 <br />
| Laserjet-5si <br />
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area <br />
| Rocco<br />
|-<br />
| 10.13.0.53 <br />
| Color LaserJet 4650n <br />
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]]n printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.54<br />
| Color LaserJet 4650dn <br />
| [[HOWTO_use_the_Laserjet_4650dn|Color Laserjet 4650]]dn printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.62<br />
| CLP-620ND<br />
| Big color laser printer<br />
| Nate B<br />
|-<br />
| 10.13.0.75<br />
| Project 1<br />
| A super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.76<br />
| Project 2<br />
| Another super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.90 <br />
| First-Cam <br />
| The Axis 206 network camera over the FIRST corner. <br />
| Ted, [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.91<br />
| Polycom-ATA<br />
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken'' <br />
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.99 <br />
| printer<br />
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack. <br />
| NateB<br />
|-<br />
| 10.13.0.100-245<br />
| DHCP RANGE <br />
| This is the DHCP range handed out by the firewall. Reservations possible<br />
|}<br />
<br />
= DNS =<br />
<br />
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.<br />
<br />
= FAQ =<br />
<br />
Q: Can we open a port in the firewall for my XYZ server? <br />
<br />
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.<br />
<br />
Q: Let's get some better bandwidth at the space! <br />
<br />
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.<br />
<br />
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn? <br />
<br />
:A: Kid, you are up past your bedtime.<br />
<br />
[[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ShoppingListShoppingList2013-03-12T04:59:10Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
See also, the electronics-specific list on [[Electronics_Room| the Electronics Room page]].<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Item<br />
! Needed for<br />
! Added by <br />
! Added date<br />
! Bought by<br />
! notes<br />
|-<br />
| Whiteboard cleaner<br />
| general use<br />
| Nate B<br />
| 2012/01/29<br />
|darvon<br />
| arrives 10/27<br />
|-<br />
| Centerpull towels<br />
| bathrooms<br />
| Nate B<br />
| 2012/01/29<br />
| <br />
| Often, 4 rolls plus a dispenser is the same price as 6 rolls. Get that...<br />
|-<br />
|10 fliptop bins for consumables<br />
|Storage<br />
|<br />
|<br />
|<br />
|http://www.homedepot.com/p/t/202534505?storeId=10051&langId=-1&catalogId=10053&productId=202534505&R=202534505#.UT613xyG18E<br />
|-<br />
|hasps for lockboxes<br />
| ?<br />
|<br />
| By Greg<br />
| Using cyl lock <br />
| will install in the WS box 10/12/12<br />
|-<br />
|3 locks<br />
| ?<br />
| <br />
| By Greg<br />
| Using Cyl locks<br />
| ?<br />
|}<br />
[[Category:Organization Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Category:NetworkingCategory:Networking2012-12-14T18:19:14Z<p>Nate lapt: /* IP Addresses in use */</p>
<hr />
<div>= Wireless Network =<br />
<br />
The SSID is '''''i3''''' , there is no encryption, this is considered a feature (for the moment). <br />
<br />
You may occasionally see an SSID of '''''3302''''' or '''''1216''''', these are the FIRST Robot control WLANs. They are completely isolated networks and are probably not very interesting to you.<br />
<br />
<br />
= LAN Addresses =<br />
<br />
Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are only using one subnet of this: 10.13.0.0/24.<br />
<br />
<br />
== Subnet: 10.13.0.0/24 ==<br />
<br />
<br />
=== Static Hosts ===<br />
<br />
If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change. <BR><BR>Most member and guest laptops, however, do not need one of these.<br />
<BR><BR>If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact [[User:Jcbender|Joe B]] or Nate W to help you out with this.<br />
<BR><br />
If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.<br />
<BR><br />
<br />
'''Static hosts use the following settings:'''<br />
<br />
{|<br />
|-<br />
| IP address<br />
| Take an unused address from the table below. Document which address you used. When in doubt, ping first.<br />
|-<br />
| Subnet mask<br />
| 255.255.255.0<br />
|-<br />
| Default Gateway<br />
| 10.13.0.1<br />
|-<br />
| DNS Server<br />
| 10.13.0.1<br />
|-<br />
| DNS domain name<br />
| i3detroit.local<br />
|-<br />
| Time / NTP server<br />
| 10.13.0.1 or 10.13.0.5 (The LAN switch is also an NTP server)<br />
|}<br />
<br />
<BR><BR><br />
<br />
=== IP Addresses in use === <br />
{|<br />
|-<br />
! Address <br />
! Host <br />
! Description <br />
! Admin(s)<br />
|-<br />
| 10.13.0.1 <br />
| pfsense <br />
| The firewall and dhcp server. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]], Brad, [[User:Nate_lapt| NateW]], Ted and others.<br />
|-<br />
| 10.13.0.5<br />
| [[i3switch01]]<br />
| This is the Cisco 3750 Ethernet switch that drives i3! Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.6<br />
| Cisco 1130 AP i3DetroitAP01<br />
| This is primary access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.7<br />
| Cisco 1130 i3DetroitAP02<br />
| This is the office space access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.8 <br />
| Asterisk <br />
| We make phone calls with this. ''Nicht für gefingerpöken'' <br />
| [[User:Nate_lapt| Nate]].<br />
|-<br />
| 10.13.0.10<br />
| [[Wireless LAN Controller]]<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.11<br />
| [[Wireless LAN Controller]] IP #2 (required)<br />
| We do nifty wireless things with this. Not a toy. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.13 <br />
| Camera Server - This can be re-purposed <br />
| Big brother is watching you. ''Nicht für gefingerpöken'' <br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.14<br />
| Cisco 1130 i3DetroitAP03<br />
| This is the back-of-shop access point for i3Detroit. Not a toy. ''Nicht für gefingerpöken''<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.15 <br />
| i3Debian - Skynet<br />
| "The Debian Box" General-purpose sandbox. Not to be considered reliable or mission-critical <br />
| Ted, [[User:Nate_lapt| NateW]], Eric, ToasterDan, Ross<br />
|-<br />
| 10.13.0.40<br />
| [[i3Switch02]]<br />
| i3 Second managed Ethernet switch in rack<br />
| [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.50 <br />
| Plotter <br />
| [[HOWTO use the Plotter|The HP DesignJet 300 ]] <br />
| Roger, Rocco?<br />
|-<br />
| 10.13.0.51 <br />
| Laserjet-5si <br />
| [[HOWTO_use_the_Laserjet_5si|Laserjet 5si]] MX printer in the "print shop" area <br />
| Rocco<br />
|-<br />
| 10.13.0.53 <br />
| Color LaserJet 4650n <br />
| [[HOWTO_use_the_Laserjet_4650n|Color Laserjet 4650]] 4650n printer in the "print shop" area <br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.62<br />
| CLP-620ND<br />
| Big color laser printer<br />
| Nate B<br />
|-<br />
| 10.13.0.75<br />
| Project 1<br />
| A super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.76<br />
| Project 2<br />
| Another super-secret project<br />
| [[User:Surferdudemi| RogerS]]<br />
|-<br />
| 10.13.0.90 <br />
| First-Cam <br />
| The Axis 206 network camera over the FIRST corner. <br />
| Ted, [[User:Jcbender| JCBender]]<br />
|-<br />
| 10.13.0.91<br />
| Polycom-ATA<br />
| Cisco ATA-186 VOIP adapter for the Polycom conference phone. ''Nicht f&uuml;r gefingerp&ouml;ken'' <br />
| [[User:Jcbender| JCBender]], [[User:Nate_lapt| NateW]]<br />
|-<br />
| 10.13.0.99 <br />
| printer<br />
| [[HOWTO_Use_the_Laserjet_6P|Laserjet 6p]] in the rack. <br />
| NateB<br />
|-<br />
| 10.13.0.100-245<br />
| DHCP RANGE <br />
| This is the DHCP range handed out by the firewall. Reservations possible<br />
|}<br />
<br />
= DNS =<br />
<br />
The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.<br />
<br />
= FAQ =<br />
<br />
Q: Can we open a port in the firewall for my XYZ server? <br />
<br />
:A: Probably not. The upstream bandwidth at the space is rather poor. You are welcome to suggest it, but be prepared to meet with significant resistance from your fellow members. Alternately, many of the members have COLO space that they might be willing to share. Make a proposal on the mailing list and turn on the charm.<br />
<br />
Q: Let's get some better bandwidth at the space! <br />
<br />
:A: We now have 15mbit down, 2 up from WideOpenWest. If [[The Joke That Never Gets Old|that's not enough pipe for you]], we don't know what to say.<br />
<br />
Q: whérε dö ì ƒìñd ┼Hε wâΓεz åñd ┼HΣ p┌Ωn? <br />
<br />
:A: Kid, you are up past your bedtime.<br />
<br />
[[Category:Facility Information]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-12-03T18:53:09Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out! - http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|Juki and lights have left, Jointer?<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
| one done 2 to go<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>hang shop light over table saw</strike><br />
|<strike>buy shop light for two 4ft T8 bulbs </strike><br />
|<br />
|$20<br />
|-<br />
|mount pegboard box on NW user storage end cap<br />
|box is clamped in place, needs permanent fastening<br />
|<br />
|$0, supplies on hand<br />
|-<br />
|Build wood shop machine cart<br />
|<br />
|<br />
|<br />
|-<br />
|Install Casters on Wood Shop router table<br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=AsteriskAsterisk2012-12-03T16:14:08Z<p>Nate lapt: /* System Specs */</p>
<hr />
<div>== INFO ==<br />
IP: 10.13.0.8 <br><br />
Login: Ask NateW <br><br />
<nowiki>#248-556-9995</nowiki> <p><br />
<br />
== Extensions == <br />
1 - Calls all phones within space <br><br />
2 - Plays Open Status <br><br />
3 - Current Events <br><br />
4 - Contact info <br><br />
5 - Conference Line <br><br />
6 - Internal Lines <br><br />
<br><br />
== Internal Lines == <br />
1 - Ring all <br><br />
2 - Cordless <br><br />
<br />
4 - Rings Machine Shop (Non-Working) <br><br />
5 - Electronics Room <br><br />
<br><br />
<br />
== External Forwards ==<br />
3232 - Hackerspace Call-in - [[http://hackerspaces.org/wiki/Call-in<br />
]] <br><br />
This ext can be dialed inside and outside the space<br />
<br />
<br><br />
<br />
== System Specs==<br />
Soekris net4801 <br><br />
Grandstream - eroom <br><br />
5 Polycom ip 501 http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint_ip/soundpoint_ip501.html <br><br />
Polycom Quick how:to guide http://i3detroit.com/wi/images/d/da/Soundpoint_ip501_quick_user_guide.pdf<br />
<br />
== Dialplan ==<br />
<pre>[incoming_calls]<br />
<br />
[phones]<br />
include => internal<br />
include => incoming<br />
include => outbound-local<br />
include => Main-Menu<br />
<br />
[incoming]<br />
exten => 2485569995,1,Answer()<br />
exten => 2485569995,n,Goto(internal,s,1)<br />
<br />
[internal]<br />
<br />
exten => s,1,Wait(1)<br />
exten => s,2,goto(Main-Menu,s,1)<br />
<br />
<br />
[Main-Menu]<br />
exten => s,1,Background(intro)<br />
<br />
;Hello, You have reached the i3Detroit Phone system,<br />
;The space is currently <br />
exten => s,2,background(oc) ;Open/Closed to guests <br />
exten => s,3,background(intro2) ;Please hold for options, or press 1 to connect during any menu.<br />
<br />
<br />
<br />
<br />
exten => s,n,background(line1) ;Line 1 Ring All<br />
exten => s,n,Background(line2) ;Check open shop status dial 2.<br />
exten => s,n,background(line3) ;Events<br />
exten => s,n,background(line4) ;to Contact i3Detroit<br />
exten => s,n,background(line5) ;Conference Line<br />
exten => s,n,background(line6) ;Extension sub menu<br />
exten => s,n,wait(3)<br />
exten => s,n,goto(Main-Menu,s,1)<br />
<br />
exten => 1,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337&SIP/201&SIP/202&SIP/203&SIP/204&SIP/205,40,tr)<br />
exten => 1,n,Voicemail(100@default,u)<br />
exten => 2,1,GoTo(Main-Menu,s,2)<br />
exten => 3,1,GoTo(events,s,1)<br />
exten => 4,1,GoTo(contact,s,1)<br />
exten => 5,1,meetme(600) <br />
exten => 6,1,goto(extsubmenu,s,1)<br />
exten => 8,1,background(toast)<br />
exten => 1338,1,goto(outbound-local,1338,1)<br />
<br />
<br />
exten => 100,1,Dial(SIP/100,20)<br />
exten => 300,1,Dial(SIP/300,20)<br />
exten => 600,1,MeetMe(600)<br />
exten => 1337,1,Dial(SIP/xlite1)<br />
exten => 701,1,Voicemail(100@default)<br />
exten => 700,1,VoiceMailMain()<br />
exten => 200,1,Dial(SIP/200,20)<br />
exten => 2222,1,Playback(oc)<br />
exten => 2222,n,GoTo(s,1)<br />
exten => 4550,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337)<br />
exten => 9000,1,background(vegetaover9000)<br />
exten => 9000,n,goto(Main-Menu,s,1)<br />
exten => 3232,1,Dial(SIP/77223@voip.telephreak.org)<br />
exten => 204,1,Dial(SIP/204,20)<br />
exten => i,1,goto(Main-Menu,s,1)<br />
<br />
<br />
<br />
[extsubmenu]<br />
exten => s,1,background(line1) ;Ring all<br />
exten => s,n,background(classroom) ;Classroom<br />
exten => s,n,background(podcast) ;Podcast booth<br />
;exten => s,n,background(shop) ;Rings Shop<br />
exten => s,n,WaitExten(6|m)<br />
exten => s,n,Goto(Main-Menu,s,1)<br />
<br />
<br />
exten => 1,1,goto(Main-Menu,1,1)<br />
exten => 2,1,Dial(SIP/200)<br />
exten => 3,1,Dial(SIP/300)<br />
exten => 4,1,Dial(SIP/400)<br />
exten => i,1,GoTo(Main-Menu,s,1)<br />
<br />
[events]<br />
exten => s,1,Background(e1)<br />
exten => s,n,Background(e2)<br />
exten => s,n,Background(e3)<br />
exten => s,n,Background(e4)<br />
;exten => s,n,Background(noevents)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[contact]<br />
exten => s,1,Background(ext)<br />
exten => s,n,saydigits(1)<br />
exten => s,n,Background(vm)<br />
exten => s,n,background(web)<br />
exten => s,n,background(email)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[Hidden Lines]<br />
;100 Grandstream (Loft)<br />
;200 VTech (Cordless)<br />
;300 Podcast Booth<br />
;400 Shop floor<br />
;700 Voicemail Checking<br />
;701 Voicemail<br />
;1337 Nate Softphone<br />
;9000 Over 9000<br />
;4500 Page (speakers)<br />
;4550 Ring All<br />
;6000 Disco Ball<br />
;6969 Rumba<br />
;7000 Toaster<br />
<br />
<br />
<br />
[outbound-local]<br />
exten => _NXXXXXXXXX,1,Set(CALLERID(all)=2485569995)<br />
exten => _NXXXXXXXXX,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => _NXXXXXXXXX,n,Congestion()<br />
exten => _NXXXXXXXXX,n,Hangup()<br />
<br />
exten => 911,1,Set(CALLERID(all)=2485569995)<br />
exten => 911,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => 9911,1,Set(CALLERID(all)=2485569995)<br />
exten => 9911,n,Dial(IAX2/i3detroit/1${EXTEN}) <br />
<br />
<br />
</pre><br />
[[Category:Facility Information]][[Category:Networking]][[Category:HOWTO]][[Category:Internal HOWTO]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=File:Soundpoint_ip501_quick_user_guide.pdfFile:Soundpoint ip501 quick user guide.pdf2012-12-03T16:07:30Z<p>Nate lapt: Polycom Quick howto guide</p>
<hr />
<div>Polycom Quick howto guide</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-12-03T15:55:10Z<p>Nate lapt: </p>
<hr />
<div><br />
<br />
Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out!<br />
| <br />
| $0<br />
|-<br />
|<strike> make vinyl "propaganda signs"</strike><br />
|<strike> sayings about keeping the place clean and such</strike><br />
|<br />
|<br />
|-<br />
|<strike> make stencil on lasercutter</strike><br />
|<strike> sayings "SWEEP If you can't read this" spraypaint on woodshop floor</strike><br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|Everyone - Everyday!<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|<strike>Forklift repair</strike><br />
|<strike>Repair ignition switch</strike><br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>purge graveyard</strike><br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>cyclone fence around kiln</strike><br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|<strike>assemble last set of orange shelves</strike><br />
|<strike>the ends arnt the same, either welding together or drilling and bolting</strike><br />
|Nate W<br />
|<br />
|-<br />
|<strike>find home for injection molders</strike><br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|<strike>find new home for paint</strike><br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>rubber shroud for dust collector</strike><br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|Juki and lights have left, Jointer?<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>build a workbench area for laser cutter</strike><br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
| one done 2 to go<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|build tool holder for vinyl area<br />
|This would be nice to vacuum form!<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>organize cleaning cabinet</strike><br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|<strike>move rack into kitchen for extra pop</strike><br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|<strike>buy 3 drawer thingy for kitchen</strike><br />
|buy utensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|<strike>hang shop light over table saw</strike><br />
|<strike>buy shop light for two 4ft T8 bulbs </strike><br />
|<br />
|$20<br />
|-<br />
|mount pegboard box on NW user storage end cap<br />
|box is clamped in place, needs permanent fastening<br />
|<br />
|$0, supplies on hand<br />
|-<br />
|Build wood shop machine cart<br />
|<br />
|<br />
|<br />
|-<br />
|Install Casters on Wood Shop router table<br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|<strike>Move Drill Press to Wood Shop</strike><br />
|Find better location in Wood Shop, NOT in front of sweep drop to dust collector.<br />
|<br />
|<br />
|-<br />
|<strike>Make "I don't know where this goes" boxes for each main area</strike><br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|<strike>Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door</strike><br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| <strike>Bolt the machine shop bench to the North wall </strike><br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| <strike>Audit Door Access keys</strike><br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-11-28T14:59:46Z<p>Nate lapt: </p>
<hr />
<div>Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out!<br />
| <br />
| $0<br />
|-<br />
|make vinyl "propaganda signs"<br />
|sayings about keeping the place clean and such<br />
|<br />
|<br />
|-<br />
|make stencil on lasercutter<br />
|sayings "SWEEP If you can't read this" spraypaint on woodshop floor<br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|Forklift repair<br />
|Repair ignition switch<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|purge graveyard<br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|cyclone fence around kilm<br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|assemble last set of orange shelves<br />
|the ends arnt the same, either welding together or drilling and bolting<br />
|Nate W<br />
|<br />
|-<br />
|find home for injection molders<br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|find new home for paint<br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|rubber shroud for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|build a workbench area for laser cutter<br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
| one done 2 to go<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|build tool holder for vinyl area<br />
|<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|organize cleaning cabinet<br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|move rack into kitchen for extra pop<br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop office floors<br />
|Wax floors later in the night after everyone is done up front<br />
|<br />
|<br />
|-<br />
|buy 3 drawer thingy for kitchen<br />
|buy untensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|hang shop light over table saw<br />
|buy shop light for two 4ft T8 bulbs <br />
|<br />
|$20<br />
|-<br />
|mount pegboard box on NW user storage end cap<br />
|box is clamped in place, needs permanent fastening<br />
|<br />
|$0, supplies on hand<br />
|-<br />
|Build wood shop machine cart<br />
|<br />
|<br />
|<br />
|-<br />
|Install Casters on Wood Shop router table<br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|Move Drill Press to Wood Shop<br />
|<br />
|<br />
|<br />
|-<br />
|Make "I don't know where this goes" boxes for each main area<br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door<br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| Bolt the machine shop bench to the North wall <br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| Audit Door Access keys<br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-11-28T01:53:38Z<p>Nate lapt: </p>
<hr />
<div>Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out!<br />
| <br />
| $0<br />
|-<br />
|make vinyl "propaganda signs"<br />
|sayings about keeping the place clean and such<br />
|<br />
|<br />
|-<br />
|make stencil on lasercutter<br />
|sayings "SWEEP If you can't read this" spraypaint on woodshop floor<br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
| Greg installed magnet on Saw switch may be ok<br />
| G donated Magnet<br />
|-<br />
|sweep and vaccum<br />
|<br />
|<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|Forklift repair<br />
|Repair ignition switch<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|purge graveyard<br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|cyclone fence around kilm<br />
|<br />
|Terry W<br />
|$150<br />
|-<br />
|assemble last set of orange shelves<br />
|the ends arnt the same, either welding together or drilling and bolting<br />
|Nate W<br />
|<br />
|-<br />
|find home for injection molders<br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|find new home for paint<br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|rubber shroud for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|build a workbench area for laser cutter<br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
| one done 2 to go<br />
| Greg Smith<br />
| 12.82<br />
|-<br />
|build tool holder for vinyl area<br />
|<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|organize cleaning cabinet<br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|Complete inventory of shit, er, supplies; file plan for minor layout changes: Tues. PM (see [[Craft Room Inventory: 20121110]])<br />
|Kevin Flory<br />
|Under $50<br />
|-<br />
|move rack into kitchen for extra pop<br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop floor<br />
|<br />
|<br />
|<br />
|-<br />
|buy 3 drawer thingy for kitchen<br />
|buy untensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
|hang shop light over table saw<br />
|buy shop light for two 4ft T8 bulbs <br />
|<br />
|$20<br />
|-<br />
|mount pegboard box on NW user storage end cap<br />
|box is clamped in place, needs permanent fastening<br />
|<br />
|$0, supplies on hand<br />
|-<br />
|Build wood shop machine cart<br />
|<br />
|<br />
|<br />
|-<br />
|Install Casters on Wood Shop router table<br />
|Admire how nice it is<br />
|Greg Smith<br />
|<br />
|-<br />
|Move Drill Press to Wood Shop<br />
|<br />
|<br />
|<br />
|-<br />
|Make "I don't know where this goes" boxes for each main area<br />
|<br />
|<br />
|<br />
|-<br />
|Add dust cover to south side of freestanding member storage<br />
|<br />
|<br />
|<br />
|-<br />
|Move SandBlast Station and supplies to East Wall between Welding Zone and Overhead Door<br />
|<br />
|Jim Kemp<br />
|$0<br />
|-<br />
| Bolt the machine shop bench to the North wall <br />
|<br />
| Ted<br />
| $0<br />
|-<br />
| Audit Door Access keys<br />
|<br />
| Nate W<br />
| $0<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Craft_Room_Inventory:_20121110Craft Room Inventory: 201211102012-11-26T05:44:57Z<p>Nate lapt: </p>
<hr />
<div>IN-PROGRESS, 2012-11-24<br />
<br />
<br />
<br />
There's a task (on the task list [[ToDo]]) to clean up the craft room. However, part of the problem with carrying out this task is that the craft room is simply crammed with cool stuff.<br />
<br />
We don't have enough space for all this stuff. To help the group pare things down, I'm going to start an inventory of what's in here.<br />
<br />
'''This document is in-progress. I have been cleaning, labeling, and inventorying in the Craft Room as I have time. The document is neither exhaustive nor complete. Please contact Kevin Flory (419-234-6200) for details on the work I've done so far.'''<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|+Materials<br />
|+Please note that this list is of all materials which aren't marked for personal use only. This list contains supplies that anyone can consume. ''Donations gratefully accepted.''<br />
!Item<br />
!Detailed Description<br />
!Owner/Sponser (If Known)<br />
!Size<br />
!Current Location<br />
!Pic<br />
|-<br />
|Mosaic Supplies<br />
|Large collection of mosaic supplies in own cabinet.<br />
|?<br />
|2' x 1' x 2'7.5"<br />
|North wall, to immediate E. of door<br />
|None At Present<br />
|-<br />
|Acrylic Paint<br />
|Tube and bottled acrylic paint in a wide variety of qualities ("Craft", "Basic", "Artist") and colors. Contained in labeled box.<br />
|?<br />
|14.5" x 11.5" x 6.5"<br />
|Supply shelf, NW corner<br />
|None At Present<br />
|-<br />
|Oil paint<br />
|Tube oil paints, basic color range.<br />
|?<br />
|Shoe Box<br />
|Supply shelf, NW corner<br />
|None At Present<br />
|-<br />
|Paint thinner, varnishes<br />
|Various liquids used in painting. More complete list to follow if interest warrants.<br />
|Kevin Flory<br />
|Shoe Box<br />
|Supply shelf, NW corner<br />
|None At Present<br />
|-<br />
|Polyester Stuffing<br />
|4 bags, loose, at 2 lb. apiece [that's a LOT of stuffing]<br />
|?<br />
|12" x 18" x 10"<br />
|W wall, cubed shelving units, bottom L.<br />
|None At Present<br />
|-<br />
|Sheet Stuffing<br />
|Various scraps, none larger than 16 x 18 triangle.<br />
|?<br />
|N/A<br />
|Packed with loose polyester stuffing.<br />
|None At Present<br />
|-<br />
|Fabric<br />
|Even more fabric than there is stuffing, and that's saying a lot. Everything from patch-sized remnants through swaths of complete bolts (longest measure thus far comes in around 13'). ''Needs a complete sorting and inventory job by someone who knows what they're doing!''<br />
|?<br />
|N/A<br />
|Packed above loose polyester stuffing.<br />
|None At Present<br />
|-<br />
|Fake Birds<br />
|Pretty fake birdies. Wide variety, some of which is shown in photo.<br />
|?<br />
|Bagged--app. shoebox size.<br />
|Supply shelf, NW corner<br />
|[[File:CraftRoomInventory_CraftBirdies.jpg|thumb]]<br />
|-<br />
|}<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|+Equipment<br />
!Item<br />
!Detailed Description<br />
!Owner/Sponser (If Known)<br />
!Size<br />
!Current Location<br />
!Pic<br />
|-<br />
|Brushes, Q-Tips, Palettes<br />
|<br />
|Mel B.<br />
|Drawer in fixture 15" x 21.5" x 25.5"<br />
|3-drawer fixture underneath workbench--bottom drawer, labeled "Painting Supplies".<br />
|None At Present<br />
|-<br />
|Paper Cutters<br />
|2 guillotine cutters-one 14" blade, one 12".<br />
|Mel B.<br />
|14" cutter @ 14.5" x 13" x 1.5", 12" cutter @ 12" x 13" x 2 1/8"<br />
|Floating, no 'permanent' home assigned<br />
|None At Present<br />
|-<br />
|Snap/Grommet Kit<br />
|(Apparently) used for putting on and taking off snaps, eyelets, and other metal fixtures on fabric. Contained in labeled custom-fit box.<br />
|?<br />
|14.5" x 10' x 2'<br />
|Sewing supplies shelf, E wall<br />
|None At Present<br />
|-<br />
|Sewing Miscellany Kit 1<br />
|Kit with mixed sewing supplies<br />
|?<br />
|14.5" x 10' x 2'<br />
|Sewing supplies shelf, E wall<br />
|None At Present<br />
|-<br />
|}<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|+Projects And Random Unlabeled Stuff<br />
!Item<br />
!Detailed Description<br />
!Owner (If Known)<br />
!Current Location<br />
!Pic<br />
|-<br />
|Black Party Lamp<br />
|Plywood base; lamp is duct-taped to base.<br />
|?<br />
|Lost & Found (Under Ed's desk--E. end of room)<br />
|[[File:CraftRoomInventory_BlackPartyLamp.jpg|thumb]]<br />
|-<br />
|Box of Paper Cranes<br />
|Also holds origami/construction paper and wire mounts.<br />
|?<br />
|On top of shelf of mosaic supplies.<br />
|[[File:CraftRoomInventory_Project_PaperCranes.jpg|thumb]]<br />
|-<br />
|Big Green Hanging Thingy<br />
|Cat toy? - Nope, this is a hanging mesh shelf. Hang it if it'll be used<br />
|?<br />
|Sitting in wood/canvas envelope rack.<br />
|[[File:CraftRoomInventory_BigGreenHangingThingy-Open.jpg|thumb]]<br />
[[File:CraftRoomInventory_BigGreenHangingThingy-Closed.jpg|thumb]]<br />
|-<br />
|Burnt-Wood Owl Plaquette<br />
|Initials "JW" visible in lower right corner.<br />
|? Jamie Wolfe - used to be on shelf for decoration.<br />
|Lost & Found (Under Ed's desk--E. end of room)<br />
|[[File:CraftRoomInventory_Project_OwlPlaquette.jpg|thumb]]<br />
|-<br />
|Disposible (?) Painting Smock<br />
|Obviously used.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_DisposablePaintingSmock.jpg|thumb]]<br />
|-<br />
|Unknown Electrical Project<br />
|Phrases "HOT" and "~2 Amp" labeled on surface in blue marker. - This is a Hot wire foam cutter<br />
|? <br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoom_UnknownWoodenFixture.jpg|thumb]]<br />
|-<br />
|Sewing Item?<br />
|Unknown function. Label in photo reads "XL".<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_UnknownSewingItem.jpg|thumb]]<br />
|-<br />
|Crafty "Kitties On A Basket"<br />
|Beats Chicken-in-a-Biskit cold. Seriously...what's up with gluing together basketry and a fuzzy cartoon kitty, in multiples?<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_CraftProject_KittiesOnBaskets.jpg|thumb]]<br />
|-<br />
|"Edsyn" Key Fob<br />
|Label reads "Edsyn". Nothing else is known about this tantalizingly mysterious object.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_EdsynKeyFob.jpg|thumb]]<br />
|-<br />
|Lego Spinning Mill<br />
|Unless someone can prove that this is still a project in progress, this item will be disassembled and returned to the lego storage.<br />
|? - NateB made it for a project at the old space, kinda has just sat around as a concept of hey, legos can do this.<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_LegoSpinningMill.jpg|thumb]]<br />
|-<br />
|2012 Power Racing Poster<br />
|Did someone intend to frame this? We'll be more than happy to show you how, and where to store your project in the meantime!<br />
|?<br />
|On top of Ed's drafting desk--E. end of room<br />
|[[File:CraftRoomInventory_PowerRacingPoster-2012.jpg|thumb]]<br />
|-<br />
|Canvas With Winter Scene<br />
|Seems to be a dead project; has been sitting on the workbench since at least September.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_Project_CanvasWithWinterScene.jpg|thumb]]<br />
|-<br />
|T-Shirts And Fanny Pack<br />
|Three t-shirts and a fanny pack, stuck in a plastic sack. Another dead project?<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_TShirtsAndFannyPack.jpg|thumb]]<br />
|-<br />
|Zombie Makeup Kit<br />
|As per label on containing bag. Contents as in photo.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_ZombieMakeupKit.jpg|thumb]]<br />
|-<br />
|Oversize Pink...Thing?<br />
|It looks like a tutu, but it seems to be a bit large, no insult intended. Reference is a 1-foot wooden ruler.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_PinkTutuThingy.jpg|thumb]]<br />
|-<br />
|Random Sewn Thing<br />
|No idea. Found it while sorting the fabric bins.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_Project_UnknownSewnItem1.jpg|thumb]]<br />
|-<br />
|Random Sewn Thing<br />
|No idea. Found it while sorting the fabric bins.<br />
|?<br />
|Lost & Found (Under Ed's drafting desk--E. end of room)<br />
|[[File:CraftRoomInventory_Project_UnknownSewnItem2.jpg|thumb]]<br />
|-<br />
|}</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Potlock_Menu_PlanningPotlock Menu Planning2012-11-26T05:35:50Z<p>Nate lapt: </p>
<hr />
<div>* There will be two mealtimes: "lunch" at ~1pm and "dinner" at ~7pm, or whenever somebody starts cooking!<br />
* Snacks of various kinds will be available throughout.<br />
* Beverages will be BYOB since we've already got a supply of pop in the kitchen. This is a great opportunity to restock your favorites if they're running low!<br />
* There is a grill at the space, right?<br />
* If you have a crockpot, please consider using it! We don't have proper kitchen at the space, so crockpots and such will be helpful for supplying us all with hot food.<br />
* Please avoid common allergens (or put them on the side) if they're optional in your recipe: nuts, dairy, wheat, etc.<br />
<br><br />
==Lunch Entrees==<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food''' <br />
|- <br />
|tasty snacks<br />
| i3 detroit member #2342<br />
|-<br />
| veggie dip<br />
| Allen M<br />
|-<br />
| 6 foot italian sub<br />
| Terry W<br />
|- <br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|- <br />
| <br />
| <br />
|}<br />
<br />
== Dinner Entrees ==<br />
<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food'''<br />
|- style="background: none repeat scroll 0% 0% white;"<br />
| huge pan of lasagna<br />
| Jon Andersen<br />
|-<br />
| Party tray pizza<br />
| Dustin<br />
|-<br />
| Chilli<br />
| Richard - stored in white freezer<br />
|-<br />
| Casserole - Cheese, mushrooms, random stuff...<br />
| Nate W<br />
|- style="background: none repeat scroll 0% 0% white;"<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|}<br />
<br />
==Snacks, Salads, & Sides==<br />
<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food'''<br />
| '''When? (lunch, dinner, or either/both)'''<br />
|- <br />
| beef root veg soup <br />
| steve h<br />
| both<br />
|-style="background: none"<br />
| pork potstickers<br />
| Chris A<br />
| Whenever<br />
|-<br />
| Mich-made Better Made chips: BBQ and Homestyle. Awww yeeeeah.<br />
| Karen Corbeill<br />
| ?<br />
|- <br />
| <br />
| <br />
| <br />
|-<br />
|<br />
| <br />
| <br />
|- <br />
| <br />
| <br />
| <br />
|}<br />
<br />
==Desserts==<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food''' <br />
|- style="background: white"<br />
| <br />
| <br />
|-<br />
|<br />
|<br />
|-}<br />
[[Category:Event]][[Category:Past Event]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Talk:Board_Meeting_Minutes_20121106Talk:Board Meeting Minutes 201211062012-11-19T18:35:20Z<p>Nate lapt: moved Talk:Board Meeting Minutes 20121106 to Talk:Meeting Minutes 20121106</p>
<hr />
<div>#REDIRECT [[Talk:Meeting Minutes 20121106]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Board_Meeting_Minutes_20121106Board Meeting Minutes 201211062012-11-19T18:35:20Z<p>Nate lapt: moved Board Meeting Minutes 20121106 to Meeting Minutes 20121106</p>
<hr />
<div>#REDIRECT [[Meeting Minutes 20121106]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Talk:Meeting_Minutes_20121106Talk:Meeting Minutes 201211062012-11-19T18:35:20Z<p>Nate lapt: moved Talk:Board Meeting Minutes 20121106 to Talk:Meeting Minutes 20121106</p>
<hr />
<div>Quite positive he corrected himself saying 1600*</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Meeting_Minutes_20121106Meeting Minutes 201211062012-11-19T18:35:20Z<p>Nate lapt: moved Board Meeting Minutes 20121106 to Meeting Minutes 20121106</p>
<hr />
<div>'''i3Detroit Meeting November 6, 2012'''<br />
<br />
''''''Chair: Dustin White'''<br />
'''<br />
Start 7:30pm''''''<br />
<br />
<br />
<br />
''Attendees''<br />
<br />
Dustin White<br />
<br />
Roger S<br />
<br />
Paul K<br />
<br />
Nate W<br />
<br />
Adrianne<br />
<br />
Steve f00f<br />
<br />
Derek<br />
<br />
Karianne<br />
<br />
Matt H.<br />
<br />
Ted<br />
<br />
D Scholl<br />
<br />
Mark L.<br />
<br />
Gary<br />
<br />
Ed (via google hangout!)<br />
<br />
Matt O. (via google Hangout!)<br />
<br />
<br />
<br />
'''Agenda'''<br />
<br />
''<br />
Karen Needs a chair. She eventually retrieves a chair and takes a seat''<br />
<br />
'''Potluck'''<br />
<br />
''Rescheduling''<br />
<br />
Dustin: We hold the pot lock three or four times a year<br />
<br />
<br />
Ted: two<br />
<br />
<br />
Dustin:... two to three times a year....sometimes throughout the year we have a potluck/ Lock in. So what we do is we get a big list together of things that need to be done to the space, we buy material and do a whole bunch of things with the space that need to be done, like build shelves and make improvements, and Dec 1st is when it will be, after thanksgiving and before christmas so it won't interfere with anyone’s holiday plans.<br />
<br />
<br />
<br />
''Funds''<br />
<br />
Dustin continues:The shop usually pays for all the materials, I will be sending out an email with all the that need to be purchased. Please put your name on the list next to the items that you need. We look to need about $500.<br />
<br />
<br />
Ted: Lets put it to the list, and Lets review the materials, so everyone can discuss and vote based on that.<br />
<br />
<br />
Dustin ''(goes over list available on the wiki)''<br />
<br />
<br />
<br />
Karen: if you have an idea, please feel free to email me and we can work together (big smile) to have it completed.<br />
<br />
''<br />
Action: Information is to be posted to the list by Dustin''<br />
<br />
<br />
Jerry Bocci: That's all that is on the list; other ideas, please let me know. I will make sure it gets on the list. I will send an email tonight.<br />
<br />
<br />
'''Woodshop Org./ Woodworking Classes'''<br />
<br />
<br />
Greg: Dave and I have been working on this, but we have been trying to get things reorganized a little better back there and getting everyone going in the same direction. and have some vision of how it might want to be organized. we can stay after tonight and go over some ideas, we have a couple of go around carts to use, we can stack them up 2 or 3 deep, use it and<br />
<br />
<br />
Ted: who is currently the zone warden?<br />
<br />
<br />
Greg: Myself and dave. We just wanted to run this by everyone tonight, we are going to flag the tools as green for the wood shop and safety will be red. some of the red ones need to be up and people need to understand the difference between the different kinds. We spent most of today and got a lot accomplished.<br />
<br />
<br />
Ted: Can I interrupt for just a second?... I'd like to have a round of applause ''(applause)''<br />
<br />
<br />
Dustin: did you put up the peg board?<br />
<br />
<br />
Greg: Yes<br />
<br />
<br />
Dustin: You are awesome!!<br />
<br />
<br />
Karen: you’re my hero!<br />
<br />
<br />
Greg: we want to pick some training days. Mostly on safety and how to use the tools correctly. It sounds simple but it’s really not and is extremely necessary. The tools can be kind of scary. We are still trying to get some tools. We are working with some organizations to get some grant money, I would like to get Karen involved with that.<br />
<br />
<br />
I have a couple things put together for classes. Start with Safety and then move on with different tools. We can do different projects together eventually. I have no set date in mind, but it will be soon.<br />
<br />
<br />
Terry W - Can we establish who can take the classes and who is what level?<br />
<br />
<br />
Ted: we are trying to implement an across the board system for that. A list of experts on each tool in the space.<br />
<br />
<br />
<br />
'''Party Recap'''<br />
<br />
''Woot Awesome Lulz''<br />
<br />
''Applause''<br />
<br />
<br />
Karen: Raging success! Everyone had a great time! Lots of safe awesome fun.<br />
<br />
<br />
Nate W.: $19 in the sucker was put in the Donation jar!<br />
<br />
<br />
'''AHA'''<br />
<br />
<br />
Karen: so our friends in ann arbor are really hurting just ot make rent this month, they have 4 weeks to make about 1500 dollars. If you want to donate please do. It is difficult for them to keep members because they don’t have the security they have, and it’s in downtown ann arbobr so its a lot easier for people to walk in. They are offering some classes, I would like to let him come here to teach some classes, and we can give the proceeds to AHA. PLease email him if you are interested in any of the classes that he has available.<br />
<br />
<br />
Roger- We should have a laser benefit for them!<br />
<br />
<br />
Dustin: please keep in mind that roger is excited and every suggestion will have laser in front of it<br />
<br />
<br />
'''Treasurer Report'''<br />
<br />
<br />
Adiranne: good news! We are doing pretty great finacially!<br />
<br />
<br />
Ted: Woo hoo! ''(more applause)''<br />
<br />
<br />
Karen: ball pit<br />
<br />
<br />
Nate; Bouncy house? <br />
<br />
<br />
Adrianne: we got some pretty good donations last month! The Credit union donation was amazing and we got our tax refund!WE also got a donation of $500 from the soldering class with the children on sunday ''(applause for SwiT)''<br />
<br />
<br />
Adrianne: our income greatly exceeded our expenses for october!<br />
<br />
Terry Wynn: what's our run rate? Our expenses each month?<br />
<br />
<br />
Adrianne: about $2800-$3500<br />
<br />
<br />
Ted: so we are planning in future months to expand the treasurer’s report. WE are working on a budget for 2013. Then we can start arguing on how we can increase revenue.<br />
<br />
<br />
<br />
Dustin: Pay your dues!! I know we have a lot of members who haven't been paying their dues.<br />
<br />
<br />
Adrianne: this is actually getting better!! Does anyone have any questions about paying dues? We do accept payments through amazon!<br />
<br />
<br />
'''New business'''<br />
<br />
''<br />
New members''<br />
<br />
<br />
Terry Wynn: Interested in getting the Kiln online! Right now it’s safe to get up to 1600 degrees, there is some basic cleaning that needs to be done, but it should be up and running by mid, late next week! WEecan cook a turkey in it in about 5 minutes<br />
<br />
<br />
'''Forklift'''<br />
<br />
<br />
Gary: I have not seen the actual motor actually rotate. we found a new starter.<br />
<br />
<br />
Dustin: we can pull that out of shop funds<br />
<br />
<br />
foof: if we need a manual for it, it’s $35 bucks. We have manual from other versions, but they aren’t very helpful<br />
<br />
<br />
Ted; so what are you asking for?<br />
<br />
<br />
foof: if the starter isn't the issue, we need to further investigate. The Manual will help.<br />
<br />
<br />
Ted; if you need money, I think we can just bring it up on that list<br />
<br />
<br />
Gary: before we spend money i have a friend who is willing to come and troubleshoot<br />
<br />
<br />
Dustin: so go ahead and get that thing pulled and checked and then we will find out if we need to pull shop funds for the manual or other items.<br />
<br />
<br />
Gary: Also, it has electrical issues i am not very good with electrical.<br />
<br />
<br />
<br />
'''Other business'''<br />
<br />
<br />
Gary M. - just an offer i found a a wheeled card, its about the size of the shelving unti with the pumpkins. if it is useful to anyone.<br />
<br />
<br />
Karen: Bring it in! Dustin will find a use for it!<br />
<br />
<br />
Dustin: I will!!<br />
<br />
<br />
Gary M.: The only downside is that it needs a coat of paint.<br />
<br />
<br />
Maddy: I can take care of that<br />
<br />
<br />
Dustin: Any other new business?<br />
<br />
<br />
Roger: Lasers!<br />
<br />
<br />
''End 8:10pm''<br />
<br />
[[Category:Organization Information]][[Category:Meeting Minutes]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Meeting_Minutes_20121106Meeting Minutes 201211062012-11-19T18:34:54Z<p>Nate lapt: </p>
<hr />
<div>'''i3Detroit Meeting November 6, 2012'''<br />
<br />
''''''Chair: Dustin White'''<br />
'''<br />
Start 7:30pm''''''<br />
<br />
<br />
<br />
''Attendees''<br />
<br />
Dustin White<br />
<br />
Roger S<br />
<br />
Paul K<br />
<br />
Nate W<br />
<br />
Adrianne<br />
<br />
Steve f00f<br />
<br />
Derek<br />
<br />
Karianne<br />
<br />
Matt H.<br />
<br />
Ted<br />
<br />
D Scholl<br />
<br />
Mark L.<br />
<br />
Gary<br />
<br />
Ed (via google hangout!)<br />
<br />
Matt O. (via google Hangout!)<br />
<br />
<br />
<br />
'''Agenda'''<br />
<br />
''<br />
Karen Needs a chair. She eventually retrieves a chair and takes a seat''<br />
<br />
'''Potluck'''<br />
<br />
''Rescheduling''<br />
<br />
Dustin: We hold the pot lock three or four times a year<br />
<br />
<br />
Ted: two<br />
<br />
<br />
Dustin:... two to three times a year....sometimes throughout the year we have a potluck/ Lock in. So what we do is we get a big list together of things that need to be done to the space, we buy material and do a whole bunch of things with the space that need to be done, like build shelves and make improvements, and Dec 1st is when it will be, after thanksgiving and before christmas so it won't interfere with anyone’s holiday plans.<br />
<br />
<br />
<br />
''Funds''<br />
<br />
Dustin continues:The shop usually pays for all the materials, I will be sending out an email with all the that need to be purchased. Please put your name on the list next to the items that you need. We look to need about $500.<br />
<br />
<br />
Ted: Lets put it to the list, and Lets review the materials, so everyone can discuss and vote based on that.<br />
<br />
<br />
Dustin ''(goes over list available on the wiki)''<br />
<br />
<br />
<br />
Karen: if you have an idea, please feel free to email me and we can work together (big smile) to have it completed.<br />
<br />
''<br />
Action: Information is to be posted to the list by Dustin''<br />
<br />
<br />
Jerry Bocci: That's all that is on the list; other ideas, please let me know. I will make sure it gets on the list. I will send an email tonight.<br />
<br />
<br />
'''Woodshop Org./ Woodworking Classes'''<br />
<br />
<br />
Greg: Dave and I have been working on this, but we have been trying to get things reorganized a little better back there and getting everyone going in the same direction. and have some vision of how it might want to be organized. we can stay after tonight and go over some ideas, we have a couple of go around carts to use, we can stack them up 2 or 3 deep, use it and<br />
<br />
<br />
Ted: who is currently the zone warden?<br />
<br />
<br />
Greg: Myself and dave. We just wanted to run this by everyone tonight, we are going to flag the tools as green for the wood shop and safety will be red. some of the red ones need to be up and people need to understand the difference between the different kinds. We spent most of today and got a lot accomplished.<br />
<br />
<br />
Ted: Can I interrupt for just a second?... I'd like to have a round of applause ''(applause)''<br />
<br />
<br />
Dustin: did you put up the peg board?<br />
<br />
<br />
Greg: Yes<br />
<br />
<br />
Dustin: You are awesome!!<br />
<br />
<br />
Karen: you’re my hero!<br />
<br />
<br />
Greg: we want to pick some training days. Mostly on safety and how to use the tools correctly. It sounds simple but it’s really not and is extremely necessary. The tools can be kind of scary. We are still trying to get some tools. We are working with some organizations to get some grant money, I would like to get Karen involved with that.<br />
<br />
<br />
I have a couple things put together for classes. Start with Safety and then move on with different tools. We can do different projects together eventually. I have no set date in mind, but it will be soon.<br />
<br />
<br />
Terry W - Can we establish who can take the classes and who is what level?<br />
<br />
<br />
Ted: we are trying to implement an across the board system for that. A list of experts on each tool in the space.<br />
<br />
<br />
<br />
'''Party Recap'''<br />
<br />
''Woot Awesome Lulz''<br />
<br />
''Applause''<br />
<br />
<br />
Karen: Raging success! Everyone had a great time! Lots of safe awesome fun.<br />
<br />
<br />
Nate W.: $19 in the sucker was put in the Donation jar!<br />
<br />
<br />
'''AHA'''<br />
<br />
<br />
Karen: so our friends in ann arbor are really hurting just ot make rent this month, they have 4 weeks to make about 1500 dollars. If you want to donate please do. It is difficult for them to keep members because they don’t have the security they have, and it’s in downtown ann arbobr so its a lot easier for people to walk in. They are offering some classes, I would like to let him come here to teach some classes, and we can give the proceeds to AHA. PLease email him if you are interested in any of the classes that he has available.<br />
<br />
<br />
Roger- We should have a laser benefit for them!<br />
<br />
<br />
Dustin: please keep in mind that roger is excited and every suggestion will have laser in front of it<br />
<br />
<br />
'''Treasurer Report'''<br />
<br />
<br />
Adiranne: good news! We are doing pretty great finacially!<br />
<br />
<br />
Ted: Woo hoo! ''(more applause)''<br />
<br />
<br />
Karen: ball pit<br />
<br />
<br />
Nate; Bouncy house? <br />
<br />
<br />
Adrianne: we got some pretty good donations last month! The Credit union donation was amazing and we got our tax refund!WE also got a donation of $500 from the soldering class with the children on sunday ''(applause for SwiT)''<br />
<br />
<br />
Adrianne: our income greatly exceeded our expenses for october!<br />
<br />
Terry Wynn: what's our run rate? Our expenses each month?<br />
<br />
<br />
Adrianne: about $2800-$3500<br />
<br />
<br />
Ted: so we are planning in future months to expand the treasurer’s report. WE are working on a budget for 2013. Then we can start arguing on how we can increase revenue.<br />
<br />
<br />
<br />
Dustin: Pay your dues!! I know we have a lot of members who haven't been paying their dues.<br />
<br />
<br />
Adrianne: this is actually getting better!! Does anyone have any questions about paying dues? We do accept payments through amazon!<br />
<br />
<br />
'''New business'''<br />
<br />
''<br />
New members''<br />
<br />
<br />
Terry Wynn: Interested in getting the Kiln online! Right now it’s safe to get up to 1600 degrees, there is some basic cleaning that needs to be done, but it should be up and running by mid, late next week! WEecan cook a turkey in it in about 5 minutes<br />
<br />
<br />
'''Forklift'''<br />
<br />
<br />
Gary: I have not seen the actual motor actually rotate. we found a new starter.<br />
<br />
<br />
Dustin: we can pull that out of shop funds<br />
<br />
<br />
foof: if we need a manual for it, it’s $35 bucks. We have manual from other versions, but they aren’t very helpful<br />
<br />
<br />
Ted; so what are you asking for?<br />
<br />
<br />
foof: if the starter isn't the issue, we need to further investigate. The Manual will help.<br />
<br />
<br />
Ted; if you need money, I think we can just bring it up on that list<br />
<br />
<br />
Gary: before we spend money i have a friend who is willing to come and troubleshoot<br />
<br />
<br />
Dustin: so go ahead and get that thing pulled and checked and then we will find out if we need to pull shop funds for the manual or other items.<br />
<br />
<br />
Gary: Also, it has electrical issues i am not very good with electrical.<br />
<br />
<br />
<br />
'''Other business'''<br />
<br />
<br />
Gary M. - just an offer i found a a wheeled card, its about the size of the shelving unti with the pumpkins. if it is useful to anyone.<br />
<br />
<br />
Karen: Bring it in! Dustin will find a use for it!<br />
<br />
<br />
Dustin: I will!!<br />
<br />
<br />
Gary M.: The only downside is that it needs a coat of paint.<br />
<br />
<br />
Maddy: I can take care of that<br />
<br />
<br />
Dustin: Any other new business?<br />
<br />
<br />
Roger: Lasers!<br />
<br />
<br />
''End 8:10pm''<br />
<br />
[[Category:Organization Information]][[Category:Meeting Minutes]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Main_PageMain Page2012-11-14T01:12:06Z<p>Nate lapt: /* Equipment */</p>
<hr />
<div>== [http://i3detroit.com i3 Detroit] - The Metro Detroit Hackerspace ==<br />
<br />
== Upcoming Events ==<br />
<br />
*'''[[Meetings|Regular Meeting]]''' every first and third Tuesday at 7:00pm at [[Location|i3 Detroit]] <br />
*'''[[Meetings|Board Meeting]]''' every second Tuesday at 7:30pm at [[Location|i3 Detroit]] <br />
*'''[http://www.eventbrite.com/org/245909400?s=1360008 Classes and Events]''' - our current schedule on Eventbrite.<br />
<br />
== Members ==<br />
<br />
;[[Members|Members]]<br />
:List of Active Members<br />
;[[MemberProjects|Member Projects]] <br />
:Independent Projects in Progress<br />
;[[New Member Orientation]] <br />
:Info for new and potential members, including the [[New Member Orientation#FAQ|FAQ]]<br />
<br />
;[[HOWTO Get a Wiki Account]]<br />
:Because contributions to the wiki are always good!<br />
<br />
== Projects ==<br />
[[Great Global Hackerspace Challenge 2011]] <br />
<br />
[[Red Bull Creation 2011]]<br />
<br />
== Equipment ==<br />
<br />
Information and safety procedures for our tools and equipment organized by location: <br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class="wikitable"<br />
|-<br />
! Zone <br />
! Zone Warden <br />
! Phone<br />
! Email<br />
|-<br />
|[[Craft Room]]<br />
|<br />
|<br />
|<br />
|-<br />
|[[Lasers]]<br />
| Matt A<br />
|<br />
|<br />
|-<br />
|[[Electronics Room]] <br />
|Nathaniel B<br />
|(248) 379-3614<br />
|Myself@telcodata.us<br />
|-<br />
|[[Machine Shop]]<br />
|Steve H<br />
| (734) 788-4667<br />
|steveghermann@gmail.com<br />
|-<br />
|[[Wood Shop]]<br />
|Greg S / Dave S<br />
|248-649-3565 / 248-632-3370<br />
|GregSSmith@aol.com / djscholl@gmail.com<br />
|-<br />
|[[Welding Area]]<br />
| Nate W<br />
| 248-677-1331<br />
| Nate_LapT@i3detroit.com<br />
|-<br />
|[[Kiln Zone]]<br />
| Terry W<br />
| see sign in Kiln Zone<br />
| see sign in Kiln Zone<br />
|-<br />
|[[Bicycle Shop]]<br />
|Dustin W<br />
|(248) 794-0581<br />
|dustinbikes@gmail.com<br />
|-<br />
|[[Vinyl Shop]]<br />
|<br />
|<br />
|<br />
|-<br />
|[[Fab_Lab|Fab Lab]]<br />
|Matt H<br />
|(248) 343-7432<br />
|extrudude@i3detroit.com<br />
|-<br />
|[[Tool Crib]] /consumables area<br />
|<br />
|<br />
|<br />
|-<br />
|[[Lost and Found / Graveyard]]<br />
|<br />
|<br />
|<br />
|-<br />
|[[CNC Shop]]<br />
|Brian W<br />
| (517) 974-4817<br />
| byddcryf@gmail.com<br />
|-<br />
|[[Injection Molding Shop]]<br />
| Nate W<br />
| 248-677-1331<br />
| Nate_Lapt@i3detroit.com<br />
|-<br />
|[[Commons Area]]<br />
| Your Mom<br />
|<br />
|<br />
|-<br />
|}<br />
List of all the [[Equipment]].<br />
[[Map of Zones]].<br />
<br />
== Infrastructure ==<br />
<br />
;'''[[Network]]'''<br />
:The i3Detroit network information page.<br />
<br />
;'''[[HVAC]]'''<br />
:The heating, ventilation, and air conditioning systems.<br />
<br />
;'''[[Breaker Panels]]'''<br />
:The circuit breaker panels.<br />
<br />
== Resources and Records ==<br />
<br />
;'''[[Bylaws|By Laws]]''' <br />
:Organizations Governance. In this document 'Members' refers to voting members as apposed to all 'key holders'. <br />
;'''[[Standing rules]]''' <br />
:Rules for the space.<br />
;'''[[Officers]]''' <br />
:A list of the current officers. <br />
;'''[[:Category:Meeting Minutes|Meeting Minutes]]''' <br />
:Minutes from our past meetings. <br />
;'''[[:Category:Proposals|Proposals]]''' <br />
:Archive of proposals and votes. <br />
;'''[[Committees]]'''&nbsp; <br />
:List of committees and their resources <br />
;'''[[In the Media]]''' <br />
:Published articles, videos, etc. about i3 Detroit. <br />
;'''[[Sources|Material and Tool Sources]]''' <br />
:Places to get materials and tools. <br />
;'''[[Community Contacts]]''' <br />
:Groups and people to collaborate with. <br />
;'''[[Reports]]''' <br />
:Various reports for the organization. <br />
;'''[[ToDo]]''' <br />
:The ever-changing list of maintenance and improvement tasks. <br />
;'''[[Data Management]]''' <br />
:List of all systems we use to manage member and space data.<br />
;'''[[Forms]]''' <br />
:Group Forms, Waivers, Sign-Ups, etc. <br />
;'''[[Library]]'''<br />
:Books owned by members that can be checked out.<br />
;'''[[Uploads]]''' <br />
:Useful uploaded files, such as flyers, graphics, and more.<br />
;'''[[Historical]]'''<br />
:Old versions of Bylaws, Standing Rules, etc.<br />
<br />
== [[Procedures and Instructions]] ==<br />
<br />
;'''[[HOWTO Park your car]]'''&nbsp; <br />
:Rubber side down. <br />
;'''[[HOWTO Close up the space]]'''&nbsp; <br />
:A checklist to complete if you are the last one out at the end of the night. <br />
;'''[[HOWTO Host an event at i3detroit]]'''&nbsp; <br />
:Scheduling, publicity, day-of tasks.<br />
;'''[[Harassment Policy]]'''&nbsp; <br />
:Expectations about behavior and what the group would do about it.<br />
;'''[[Officer and Director Tutorials]]'''&nbsp;<br />
:Information for Officers and Directors in training<br />
Other procedures, including membership processing are on the [[Procedures and Instructions]] page. <br />
<br />
<br><br />
<br />
== Choose Your Own Adventure ==<br />
<br />
;'''[[Start the adventure?]]'''</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Talk:Meeting_Minutes_20121106Talk:Meeting Minutes 201211062012-11-09T16:51:01Z<p>Nate lapt: Created page with "Quite positive he corrected himself saying 1600*"</p>
<hr />
<div>Quite positive he corrected himself saying 1600*</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Meeting_Minutes_20121106Meeting Minutes 201211062012-11-09T16:50:39Z<p>Nate lapt: </p>
<hr />
<div>'''i3Detroit Board Meeting November 6, 2012'''<br />
<br />
''''''Chair: Dustin White'''<br />
'''<br />
Start 7:30pm''''''<br />
<br />
<br />
<br />
''Attendees''<br />
<br />
Dustin White<br />
<br />
Roger S<br />
<br />
Paul K<br />
<br />
Nate W<br />
<br />
Adrianne<br />
<br />
Steve f00f<br />
<br />
Derek<br />
<br />
Karianne<br />
<br />
Matt H.<br />
<br />
Ted<br />
<br />
D Scholl<br />
<br />
Mark L.<br />
<br />
Gary<br />
<br />
Ed (via google hangout!)<br />
<br />
Matt O. (via google Hangout!)<br />
<br />
<br />
<br />
'''Agenda'''<br />
<br />
''<br />
Karen Needs a chair. She eventually retrieves a chair and takes a seat''<br />
<br />
'''Potluck'''<br />
<br />
''Rescheduling''<br />
<br />
Dustin: We hold the pot lock three or four times a year<br />
<br />
<br />
Ted: two<br />
<br />
<br />
Dustin:... two to three times a year....sometimes throughout the year we have a potluck/ Lock in. So what we do is we get a big list together of things that need to be done to the space, we buy material and do a whole bunch of things with the space that need to be done, like build shelves and make improvements, and Dec 1st is when it will be, after thanksgiving and before christmas so it won't interfere with anyone’s holiday plans.<br />
<br />
<br />
<br />
''Funds''<br />
<br />
Dustin continues:The shop usually pays for all the materials, I will be sending out an email with all the that need to be purchased. Please put your name on the list next to the items that you need. We look to need about $500.<br />
<br />
<br />
Ted: Lets put it to the list, and Lets review the materials, so everyone can discuss and vote based on that.<br />
<br />
<br />
Dustin ''(goes over list available on the wiki)''<br />
<br />
<br />
<br />
Karen: if you have an idea, please feel free to email me and we can work together (big smile) to have it completed.<br />
<br />
''<br />
Action: Information is to be posted to the list by Dustin''<br />
<br />
<br />
Jerry Bocci: That's all that is on the list; other ideas, please let me know. I will make sure it gets on the list. I will send an email tonight.<br />
<br />
<br />
'''Woodshop Org./ Woodworking Classes'''<br />
<br />
<br />
Greg: Dave and I have been working on this, but we have been trying to get things reorganized a little better back there and getting everyone going in the same direction. and have some vision of how it might want to be organized. we can stay after tonight and go over some ideas, we have a couple of go around carts to use, we can stack them up 2 or 3 deep, use it and<br />
<br />
<br />
Ted: who is currently the zone warden?<br />
<br />
<br />
Greg: Myself and dave. We just wanted to run this by everyone tonight, we are going to flag the tools as green for the wood shop and safety will be red. some of the red ones need to be up and people need to understand the difference between the different kinds. We spent most of today and got a lot accomplished.<br />
<br />
<br />
Ted: Can I interrupt for just a second?... I'd like to have a round of applause ''(applause)''<br />
<br />
<br />
Dustin: did you put up the peg board?<br />
<br />
<br />
Greg: Yes<br />
<br />
<br />
Dustin: You are awesome!!<br />
<br />
<br />
Karen: you’re my hero!<br />
<br />
<br />
Greg: we want to pick some training days. Mostly on safety and how to use the tools correctly. It sounds simple but it’s really not and is extremely necessary. The tools can be kind of scary. We are still trying to get some tools. We are working with some organizations to get some grant money, I would like to get Karen involved with that.<br />
<br />
<br />
I have a couple things put together for classes. Start with Safety and then move on with different tools. We can do different projects together eventually. I have no set date in mind, but it will be soon.<br />
<br />
<br />
Terry W - Can we establish who can take the classes and who is what level?<br />
<br />
<br />
Ted: we are trying to implement an across the board system for that. A list of experts on each tool in the space.<br />
<br />
<br />
<br />
'''Party Recap'''<br />
<br />
''Woot Awesome Lulz''<br />
<br />
''Applause''<br />
<br />
<br />
Karen: Raging success! Everyone had a great time! Lots of safe awesome fun.<br />
<br />
<br />
Nate W.: $19 in the sucker was put in the Donation jar!<br />
<br />
<br />
'''AHA'''<br />
<br />
<br />
Karen: so our friends in ann arbor are really hurting just ot make rent this month, they have 4 weeks to make about 1500 dollars. If you want to donate please do. It is difficult for them to keep members because they don’t have the security they have, and it’s in downtown ann arbobr so its a lot easier for people to walk in. They are offering some classes, I would like to let him come here to teach some classes, and we can give the proceeds to AHA. PLease email him if you are interested in any of the classes that he has available.<br />
<br />
<br />
Roger- We should have a laser benefit for them!<br />
<br />
<br />
Dustin: please keep in mind that roger is excited and every suggestion will have laser in front of it<br />
<br />
<br />
'''Treasurer Report'''<br />
<br />
<br />
Adiranne: good news! We are doing pretty great finacially!<br />
<br />
<br />
Ted: Woo hoo! ''(more applause)''<br />
<br />
<br />
Karen: ball pit<br />
<br />
<br />
Nate; Bouncy house? <br />
<br />
<br />
Adrianne: we got some pretty good donations last month! The Credit union donation was amazing and we got our tax refund!WE also got a donation of $500 from the soldering class with the children on sunday ''(applause for SwiT)''<br />
<br />
<br />
Adrianne: our income greatly exceeded our expenses for october!<br />
<br />
Terry Wynn: what's our run rate? Our expenses each month?<br />
<br />
<br />
Adrianne: about $2800-$3500<br />
<br />
<br />
Ted: so we are planning in future months to expand the treasurer’s report. WE are working on a budget for 2013. Then we can start arguing on how we can increase revenue.<br />
<br />
<br />
<br />
Dustin: Pay your dues!! I know we have a lot of members who haven't been paying their dues.<br />
<br />
<br />
Adrianne: this is actually getting better!! Does anyone have any questions about paying dues? We do accept payments through amazon!<br />
<br />
<br />
'''New business'''<br />
<br />
''<br />
New members''<br />
<br />
<br />
Terry Wynn: Interested in getting the Kiln online! Right now it’s safe to get up to 1600 degrees, there is some basic cleaning that needs to be done, but it should be up and running by mid, late next week! WEecan cook a turkey in it in about 5 minutes<br />
<br />
<br />
'''Forklift'''<br />
<br />
<br />
Gary: I have not seen the actual motor actually rotate. we found a new starter.<br />
<br />
<br />
Dustin: we can pull that out of shop funds<br />
<br />
<br />
foof: if we need a manual for it, it’s $35 bucks. We have manual from other versions, but they aren’t very helpful<br />
<br />
<br />
Ted; so what are you asking for?<br />
<br />
<br />
foof: if the starter isn't the issue, we need to further investigate. The Manual will help.<br />
<br />
<br />
Ted; if you need money, I think we can just bring it up on that list<br />
<br />
<br />
Gary: before we spend money i have a friend who is willing to come and troubleshoot<br />
<br />
<br />
Dustin: so go ahead and get that thing pulled and checked and then we will find out if we need to pull shop funds for the manual or other items.<br />
<br />
<br />
Gary: Also, it has electrical issues i am not very good with electrical.<br />
<br />
<br />
<br />
'''Other business'''<br />
<br />
<br />
Gary M. - just an offer i found a a wheeled card, its about the size of the shelving unti with the pumpkins. if it is useful to anyone.<br />
<br />
<br />
Karen: Bring it in! Dustin will find a use for it!<br />
<br />
<br />
Dustin: I will!!<br />
<br />
<br />
Gary M.: The only downside is that it needs a coat of paint.<br />
<br />
<br />
Maddy: I can take care of that<br />
<br />
<br />
Dustin: Any other new business?<br />
<br />
<br />
Roger: Lasers!<br />
<br />
<br />
''End 8:10pm''<br />
<br />
[[Category:Organization Information]][[Category:Meeting Minutes]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Potlock_Menu_PlanningPotlock Menu Planning2012-11-08T14:58:15Z<p>Nate lapt: /* Desserts */</p>
<hr />
<div>* There will be two mealtimes: "lunch" at ~1pm and "dinner" at ~7pm, or whenever somebody starts cooking!<br />
* Snacks of various kinds will be available throughout.<br />
* Beverages will be BYOB since we've already got a supply of pop in the kitchen. This is a great opportunity to restock your favorites if they're running low!<br />
* There is a grill at the space, right?<br />
* If you have a crockpot, please consider using it! We don't have proper kitchen at the space, so crockpots and such will be helpful for supplying us all with hot food.<br />
* Please avoid common allergens (or put them on the side) if they're optional in your recipe: nuts, dairy, wheat, etc.<br />
<br><br />
==Lunch Entrees==<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food''' <br />
|-<br />
|tasty snacks<br />
| i3 detroit member #2342<br />
|-<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|- <br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|- <br />
| <br />
| <br />
|}<br />
<br />
== Dinner Entrees ==<br />
<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food'''<br />
|- style="background: none repeat scroll 0% 0% white;"<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|- style="background: none repeat scroll 0% 0% white;"<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|-<br />
| <br />
| <br />
|}<br />
<br />
==Snacks, Salads, & Sides==<br />
<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food'''<br />
| '''When? (lunch, dinner, or either/both)''' <br />
|- <br />
| <br />
| <br />
| <br />
|-style="background: lime"<br />
| <br />
| <br />
| <br />
|-<br />
| <br />
| <br />
| <br />
|- <br />
| <br />
| <br />
| <br />
|-<br />
|<br />
| <br />
| <br />
|- <br />
| <br />
| <br />
| <br />
|}<br />
<br />
==Desserts==<br />
{| border="2"<br />
|-<br />
| '''Food Item''' <br />
| '''Bringer of Food''' <br />
|- style="background: white"<br />
| Chocolate covered hotdogs<br />
| Nate W<br />
|-<br />
|<br />
|<br />
|-}<br />
[[Category:Event]][[Category:Past Event]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=AsteriskAsterisk2012-11-07T03:58:52Z<p>Nate lapt: </p>
<hr />
<div>== INFO ==<br />
IP: 10.13.0.8 <br><br />
Login: Ask NateW <br><br />
<nowiki>#248-556-9995</nowiki> <p><br />
<br />
== Extensions == <br />
1 - Calls all phones within space <br><br />
2 - Plays Open Status <br><br />
3 - Current Events <br><br />
4 - Contact info <br><br />
5 - Conference Line <br><br />
6 - Internal Lines <br><br />
<br><br />
== Internal Lines == <br />
1 - Ring all <br><br />
2 - Cordless <br><br />
<br />
4 - Rings Machine Shop (Non-Working) <br><br />
5 - Electronics Room <br><br />
<br><br />
<br />
== External Forwards ==<br />
3232 - Hackerspace Call-in - [[http://hackerspaces.org/wiki/Call-in<br />
]] <br><br />
This ext can be dialed inside and outside the space<br />
<br />
<br><br />
<br />
== System Specs==<br />
Soekris net4801 <br><br />
Grandstream - eroom <br><br />
5 Polycom ip 501 http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint_ip/soundpoint_ip501.html<br />
<br />
== Dialplan ==<br />
<pre>[incoming_calls]<br />
<br />
[phones]<br />
include => internal<br />
include => incoming<br />
include => outbound-local<br />
include => Main-Menu<br />
<br />
[incoming]<br />
exten => 2485569995,1,Answer()<br />
exten => 2485569995,n,Goto(internal,s,1)<br />
<br />
[internal]<br />
<br />
exten => s,1,Wait(1)<br />
exten => s,2,goto(Main-Menu,s,1)<br />
<br />
<br />
[Main-Menu]<br />
exten => s,1,Background(intro)<br />
<br />
;Hello, You have reached the i3Detroit Phone system,<br />
;The space is currently <br />
exten => s,2,background(oc) ;Open/Closed to guests <br />
exten => s,3,background(intro2) ;Please hold for options, or press 1 to connect during any menu.<br />
<br />
<br />
<br />
<br />
exten => s,n,background(line1) ;Line 1 Ring All<br />
exten => s,n,Background(line2) ;Check open shop status dial 2.<br />
exten => s,n,background(line3) ;Events<br />
exten => s,n,background(line4) ;to Contact i3Detroit<br />
exten => s,n,background(line5) ;Conference Line<br />
exten => s,n,background(line6) ;Extension sub menu<br />
exten => s,n,wait(3)<br />
exten => s,n,goto(Main-Menu,s,1)<br />
<br />
exten => 1,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337&SIP/201&SIP/202&SIP/203&SIP/204&SIP/205,40,tr)<br />
exten => 1,n,Voicemail(100@default,u)<br />
exten => 2,1,GoTo(Main-Menu,s,2)<br />
exten => 3,1,GoTo(events,s,1)<br />
exten => 4,1,GoTo(contact,s,1)<br />
exten => 5,1,meetme(600) <br />
exten => 6,1,goto(extsubmenu,s,1)<br />
exten => 8,1,background(toast)<br />
exten => 1338,1,goto(outbound-local,1338,1)<br />
<br />
<br />
exten => 100,1,Dial(SIP/100,20)<br />
exten => 300,1,Dial(SIP/300,20)<br />
exten => 600,1,MeetMe(600)<br />
exten => 1337,1,Dial(SIP/xlite1)<br />
exten => 701,1,Voicemail(100@default)<br />
exten => 700,1,VoiceMailMain()<br />
exten => 200,1,Dial(SIP/200,20)<br />
exten => 2222,1,Playback(oc)<br />
exten => 2222,n,GoTo(s,1)<br />
exten => 4550,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337)<br />
exten => 9000,1,background(vegetaover9000)<br />
exten => 9000,n,goto(Main-Menu,s,1)<br />
exten => 3232,1,Dial(SIP/77223@voip.telephreak.org)<br />
exten => 204,1,Dial(SIP/204,20)<br />
exten => i,1,goto(Main-Menu,s,1)<br />
<br />
<br />
<br />
[extsubmenu]<br />
exten => s,1,background(line1) ;Ring all<br />
exten => s,n,background(classroom) ;Classroom<br />
exten => s,n,background(podcast) ;Podcast booth<br />
;exten => s,n,background(shop) ;Rings Shop<br />
exten => s,n,WaitExten(6|m)<br />
exten => s,n,Goto(Main-Menu,s,1)<br />
<br />
<br />
exten => 1,1,goto(Main-Menu,1,1)<br />
exten => 2,1,Dial(SIP/200)<br />
exten => 3,1,Dial(SIP/300)<br />
exten => 4,1,Dial(SIP/400)<br />
exten => i,1,GoTo(Main-Menu,s,1)<br />
<br />
[events]<br />
exten => s,1,Background(e1)<br />
exten => s,n,Background(e2)<br />
exten => s,n,Background(e3)<br />
exten => s,n,Background(e4)<br />
;exten => s,n,Background(noevents)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[contact]<br />
exten => s,1,Background(ext)<br />
exten => s,n,saydigits(1)<br />
exten => s,n,Background(vm)<br />
exten => s,n,background(web)<br />
exten => s,n,background(email)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[Hidden Lines]<br />
;100 Grandstream (Loft)<br />
;200 VTech (Cordless)<br />
;300 Podcast Booth<br />
;400 Shop floor<br />
;700 Voicemail Checking<br />
;701 Voicemail<br />
;1337 Nate Softphone<br />
;9000 Over 9000<br />
;4500 Page (speakers)<br />
;4550 Ring All<br />
;6000 Disco Ball<br />
;6969 Rumba<br />
;7000 Toaster<br />
<br />
<br />
<br />
[outbound-local]<br />
exten => _NXXXXXXXXX,1,Set(CALLERID(all)=2485569995)<br />
exten => _NXXXXXXXXX,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => _NXXXXXXXXX,n,Congestion()<br />
exten => _NXXXXXXXXX,n,Hangup()<br />
<br />
exten => 911,1,Set(CALLERID(all)=2485569995)<br />
exten => 911,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => 9911,1,Set(CALLERID(all)=2485569995)<br />
exten => 9911,n,Dial(IAX2/i3detroit/1${EXTEN}) <br />
<br />
<br />
</pre><br />
[[Category:Facility Information]][[Category:Networking]][[Category:HOWTO]][[Category:Internal HOWTO]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=AsteriskAsterisk2012-11-07T03:58:07Z<p>Nate lapt: /* Internal Lines */</p>
<hr />
<div>== INFO ==<br />
IP: 10.13.0.8 <br><br />
Login: Ask NateW <br><br />
<nowiki>#248-556-9995</nowiki> <p><br />
<br />
== Extensions == <br />
1 - Calls all phones within space <br><br />
2 - Plays Open Status <br><br />
3 - Current Events <br><br />
4 - Contact info <br><br />
5 - Conference Line <br><br />
6 - Internal Lines <br><br />
<br><br />
== Internal Lines == <br />
1 - Ring all <br><br />
2 - Cordless <br><br />
<br />
4 - Rings Machine Shop (Non-Working) <br><br />
5 - Electronics Room <br><br />
<br><br />
<br />
== External Forwards ==<br />
3232 - Hackerspace Call-in - [[http://hackerspaces.org/wiki/Call-in<br />
]] <br><br />
This ext can be dialed inside and outside the space<br />
<br />
<br><br />
<br />
== System Specs==<br />
Soekris net4801 <br><br />
Grandstream - eroom <br><br />
5 Polycom ip 501 http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint_ip/soundpoint_ip501.html<br />
<br />
<pre>[incoming_calls]<br />
<br />
[phones]<br />
include => internal<br />
include => incoming<br />
include => outbound-local<br />
include => Main-Menu<br />
<br />
[incoming]<br />
exten => 2485569995,1,Answer()<br />
exten => 2485569995,n,Goto(internal,s,1)<br />
<br />
[internal]<br />
<br />
exten => s,1,Wait(1)<br />
exten => s,2,goto(Main-Menu,s,1)<br />
<br />
<br />
[Main-Menu]<br />
exten => s,1,Background(intro)<br />
<br />
;Hello, You have reached the i3Detroit Phone system,<br />
;The space is currently <br />
exten => s,2,background(oc) ;Open/Closed to guests <br />
exten => s,3,background(intro2) ;Please hold for options, or press 1 to connect during any menu.<br />
<br />
<br />
<br />
<br />
exten => s,n,background(line1) ;Line 1 Ring All<br />
exten => s,n,Background(line2) ;Check open shop status dial 2.<br />
exten => s,n,background(line3) ;Events<br />
exten => s,n,background(line4) ;to Contact i3Detroit<br />
exten => s,n,background(line5) ;Conference Line<br />
exten => s,n,background(line6) ;Extension sub menu<br />
exten => s,n,wait(3)<br />
exten => s,n,goto(Main-Menu,s,1)<br />
<br />
exten => 1,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337&SIP/201&SIP/202&SIP/203&SIP/204&SIP/205,40,tr)<br />
exten => 1,n,Voicemail(100@default,u)<br />
exten => 2,1,GoTo(Main-Menu,s,2)<br />
exten => 3,1,GoTo(events,s,1)<br />
exten => 4,1,GoTo(contact,s,1)<br />
exten => 5,1,meetme(600) <br />
exten => 6,1,goto(extsubmenu,s,1)<br />
exten => 8,1,background(toast)<br />
exten => 1338,1,goto(outbound-local,1338,1)<br />
<br />
<br />
exten => 100,1,Dial(SIP/100,20)<br />
exten => 300,1,Dial(SIP/300,20)<br />
exten => 600,1,MeetMe(600)<br />
exten => 1337,1,Dial(SIP/xlite1)<br />
exten => 701,1,Voicemail(100@default)<br />
exten => 700,1,VoiceMailMain()<br />
exten => 200,1,Dial(SIP/200,20)<br />
exten => 2222,1,Playback(oc)<br />
exten => 2222,n,GoTo(s,1)<br />
exten => 4550,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337)<br />
exten => 9000,1,background(vegetaover9000)<br />
exten => 9000,n,goto(Main-Menu,s,1)<br />
exten => 3232,1,Dial(SIP/77223@voip.telephreak.org)<br />
exten => 204,1,Dial(SIP/204,20)<br />
exten => i,1,goto(Main-Menu,s,1)<br />
<br />
<br />
<br />
[extsubmenu]<br />
exten => s,1,background(line1) ;Ring all<br />
exten => s,n,background(classroom) ;Classroom<br />
exten => s,n,background(podcast) ;Podcast booth<br />
;exten => s,n,background(shop) ;Rings Shop<br />
exten => s,n,WaitExten(6|m)<br />
exten => s,n,Goto(Main-Menu,s,1)<br />
<br />
<br />
exten => 1,1,goto(Main-Menu,1,1)<br />
exten => 2,1,Dial(SIP/200)<br />
exten => 3,1,Dial(SIP/300)<br />
exten => 4,1,Dial(SIP/400)<br />
exten => i,1,GoTo(Main-Menu,s,1)<br />
<br />
[events]<br />
exten => s,1,Background(e1)<br />
exten => s,n,Background(e2)<br />
exten => s,n,Background(e3)<br />
exten => s,n,Background(e4)<br />
;exten => s,n,Background(noevents)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[contact]<br />
exten => s,1,Background(ext)<br />
exten => s,n,saydigits(1)<br />
exten => s,n,Background(vm)<br />
exten => s,n,background(web)<br />
exten => s,n,background(email)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[Hidden Lines]<br />
;100 Grandstream (Loft)<br />
;200 VTech (Cordless)<br />
;300 Podcast Booth<br />
;400 Shop floor<br />
;700 Voicemail Checking<br />
;701 Voicemail<br />
;1337 Nate Softphone<br />
;9000 Over 9000<br />
;4500 Page (speakers)<br />
;4550 Ring All<br />
;6000 Disco Ball<br />
;6969 Rumba<br />
;7000 Toaster<br />
<br />
<br />
<br />
[outbound-local]<br />
exten => _NXXXXXXXXX,1,Set(CALLERID(all)=2485569995)<br />
exten => _NXXXXXXXXX,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => _NXXXXXXXXX,n,Congestion()<br />
exten => _NXXXXXXXXX,n,Hangup()<br />
<br />
exten => 911,1,Set(CALLERID(all)=2485569995)<br />
exten => 911,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => 9911,1,Set(CALLERID(all)=2485569995)<br />
exten => 9911,n,Dial(IAX2/i3detroit/1${EXTEN}) <br />
<br />
<br />
</pre><br />
[[Category:Facility Information]][[Category:Networking]][[Category:HOWTO]][[Category:Internal HOWTO]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=AsteriskAsterisk2012-11-07T03:57:14Z<p>Nate lapt: /* System Specs */</p>
<hr />
<div>== INFO ==<br />
IP: 10.13.0.8 <br><br />
Login: Ask NateW <br><br />
<nowiki>#248-556-9995</nowiki> <p><br />
<br />
== Extensions == <br />
1 - Calls all phones within space <br><br />
2 - Plays Open Status <br><br />
3 - Current Events <br><br />
4 - Contact info <br><br />
5 - Conference Line <br><br />
6 - Internal Lines <br><br />
<br><br />
== Internal Lines == <br />
1 - Ring all <br><br />
2 - Cordless <br><br />
3 - Podcast booth (Non-Working) <br><br />
4 - Rings Machine Shop (Non-Working) <br><br />
5 - Electronics Room <br><br />
<br><br />
== External Forwards ==<br />
3232 - Hackerspace Call-in - [[http://hackerspaces.org/wiki/Call-in<br />
]] <br><br />
This ext can be dialed inside and outside the space<br />
<br />
<br><br />
<br />
== System Specs==<br />
Soekris net4801 <br><br />
Grandstream - eroom <br><br />
5 Polycom ip 501 http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint_ip/soundpoint_ip501.html<br />
<br />
<pre>[incoming_calls]<br />
<br />
[phones]<br />
include => internal<br />
include => incoming<br />
include => outbound-local<br />
include => Main-Menu<br />
<br />
[incoming]<br />
exten => 2485569995,1,Answer()<br />
exten => 2485569995,n,Goto(internal,s,1)<br />
<br />
[internal]<br />
<br />
exten => s,1,Wait(1)<br />
exten => s,2,goto(Main-Menu,s,1)<br />
<br />
<br />
[Main-Menu]<br />
exten => s,1,Background(intro)<br />
<br />
;Hello, You have reached the i3Detroit Phone system,<br />
;The space is currently <br />
exten => s,2,background(oc) ;Open/Closed to guests <br />
exten => s,3,background(intro2) ;Please hold for options, or press 1 to connect during any menu.<br />
<br />
<br />
<br />
<br />
exten => s,n,background(line1) ;Line 1 Ring All<br />
exten => s,n,Background(line2) ;Check open shop status dial 2.<br />
exten => s,n,background(line3) ;Events<br />
exten => s,n,background(line4) ;to Contact i3Detroit<br />
exten => s,n,background(line5) ;Conference Line<br />
exten => s,n,background(line6) ;Extension sub menu<br />
exten => s,n,wait(3)<br />
exten => s,n,goto(Main-Menu,s,1)<br />
<br />
exten => 1,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337&SIP/201&SIP/202&SIP/203&SIP/204&SIP/205,40,tr)<br />
exten => 1,n,Voicemail(100@default,u)<br />
exten => 2,1,GoTo(Main-Menu,s,2)<br />
exten => 3,1,GoTo(events,s,1)<br />
exten => 4,1,GoTo(contact,s,1)<br />
exten => 5,1,meetme(600) <br />
exten => 6,1,goto(extsubmenu,s,1)<br />
exten => 8,1,background(toast)<br />
exten => 1338,1,goto(outbound-local,1338,1)<br />
<br />
<br />
exten => 100,1,Dial(SIP/100,20)<br />
exten => 300,1,Dial(SIP/300,20)<br />
exten => 600,1,MeetMe(600)<br />
exten => 1337,1,Dial(SIP/xlite1)<br />
exten => 701,1,Voicemail(100@default)<br />
exten => 700,1,VoiceMailMain()<br />
exten => 200,1,Dial(SIP/200,20)<br />
exten => 2222,1,Playback(oc)<br />
exten => 2222,n,GoTo(s,1)<br />
exten => 4550,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337)<br />
exten => 9000,1,background(vegetaover9000)<br />
exten => 9000,n,goto(Main-Menu,s,1)<br />
exten => 3232,1,Dial(SIP/77223@voip.telephreak.org)<br />
exten => 204,1,Dial(SIP/204,20)<br />
exten => i,1,goto(Main-Menu,s,1)<br />
<br />
<br />
<br />
[extsubmenu]<br />
exten => s,1,background(line1) ;Ring all<br />
exten => s,n,background(classroom) ;Classroom<br />
exten => s,n,background(podcast) ;Podcast booth<br />
;exten => s,n,background(shop) ;Rings Shop<br />
exten => s,n,WaitExten(6|m)<br />
exten => s,n,Goto(Main-Menu,s,1)<br />
<br />
<br />
exten => 1,1,goto(Main-Menu,1,1)<br />
exten => 2,1,Dial(SIP/200)<br />
exten => 3,1,Dial(SIP/300)<br />
exten => 4,1,Dial(SIP/400)<br />
exten => i,1,GoTo(Main-Menu,s,1)<br />
<br />
[events]<br />
exten => s,1,Background(e1)<br />
exten => s,n,Background(e2)<br />
exten => s,n,Background(e3)<br />
exten => s,n,Background(e4)<br />
;exten => s,n,Background(noevents)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[contact]<br />
exten => s,1,Background(ext)<br />
exten => s,n,saydigits(1)<br />
exten => s,n,Background(vm)<br />
exten => s,n,background(web)<br />
exten => s,n,background(email)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[Hidden Lines]<br />
;100 Grandstream (Loft)<br />
;200 VTech (Cordless)<br />
;300 Podcast Booth<br />
;400 Shop floor<br />
;700 Voicemail Checking<br />
;701 Voicemail<br />
;1337 Nate Softphone<br />
;9000 Over 9000<br />
;4500 Page (speakers)<br />
;4550 Ring All<br />
;6000 Disco Ball<br />
;6969 Rumba<br />
;7000 Toaster<br />
<br />
<br />
<br />
[outbound-local]<br />
exten => _NXXXXXXXXX,1,Set(CALLERID(all)=2485569995)<br />
exten => _NXXXXXXXXX,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => _NXXXXXXXXX,n,Congestion()<br />
exten => _NXXXXXXXXX,n,Hangup()<br />
<br />
exten => 911,1,Set(CALLERID(all)=2485569995)<br />
exten => 911,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => 9911,1,Set(CALLERID(all)=2485569995)<br />
exten => 9911,n,Dial(IAX2/i3detroit/1${EXTEN}) <br />
<br />
<br />
</pre><br />
[[Category:Facility Information]][[Category:Networking]][[Category:HOWTO]][[Category:Internal HOWTO]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=AsteriskAsterisk2012-11-07T03:56:17Z<p>Nate lapt: /* External Forwards */</p>
<hr />
<div>== INFO ==<br />
IP: 10.13.0.8 <br><br />
Login: Ask NateW <br><br />
<nowiki>#248-556-9995</nowiki> <p><br />
<br />
== Extensions == <br />
1 - Calls all phones within space <br><br />
2 - Plays Open Status <br><br />
3 - Current Events <br><br />
4 - Contact info <br><br />
5 - Conference Line <br><br />
6 - Internal Lines <br><br />
<br><br />
== Internal Lines == <br />
1 - Ring all <br><br />
2 - Cordless <br><br />
3 - Podcast booth (Non-Working) <br><br />
4 - Rings Machine Shop (Non-Working) <br><br />
5 - Electronics Room <br><br />
<br><br />
== External Forwards ==<br />
3232 - Hackerspace Call-in - [[http://hackerspaces.org/wiki/Call-in<br />
]] <br><br />
This ext can be dialed inside and outside the space<br />
<br />
<br><br />
<br />
== System Specs==<br />
Soekris net4801 <br><br />
Grandstream - eroom <br><br />
5 Polycoms - 1 currently setup in main shop area by network rack.<br />
<br />
<pre>[incoming_calls]<br />
<br />
[phones]<br />
include => internal<br />
include => incoming<br />
include => outbound-local<br />
include => Main-Menu<br />
<br />
[incoming]<br />
exten => 2485569995,1,Answer()<br />
exten => 2485569995,n,Goto(internal,s,1)<br />
<br />
[internal]<br />
<br />
exten => s,1,Wait(1)<br />
exten => s,2,goto(Main-Menu,s,1)<br />
<br />
<br />
[Main-Menu]<br />
exten => s,1,Background(intro)<br />
<br />
;Hello, You have reached the i3Detroit Phone system,<br />
;The space is currently <br />
exten => s,2,background(oc) ;Open/Closed to guests <br />
exten => s,3,background(intro2) ;Please hold for options, or press 1 to connect during any menu.<br />
<br />
<br />
<br />
<br />
exten => s,n,background(line1) ;Line 1 Ring All<br />
exten => s,n,Background(line2) ;Check open shop status dial 2.<br />
exten => s,n,background(line3) ;Events<br />
exten => s,n,background(line4) ;to Contact i3Detroit<br />
exten => s,n,background(line5) ;Conference Line<br />
exten => s,n,background(line6) ;Extension sub menu<br />
exten => s,n,wait(3)<br />
exten => s,n,goto(Main-Menu,s,1)<br />
<br />
exten => 1,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337&SIP/201&SIP/202&SIP/203&SIP/204&SIP/205,40,tr)<br />
exten => 1,n,Voicemail(100@default,u)<br />
exten => 2,1,GoTo(Main-Menu,s,2)<br />
exten => 3,1,GoTo(events,s,1)<br />
exten => 4,1,GoTo(contact,s,1)<br />
exten => 5,1,meetme(600) <br />
exten => 6,1,goto(extsubmenu,s,1)<br />
exten => 8,1,background(toast)<br />
exten => 1338,1,goto(outbound-local,1338,1)<br />
<br />
<br />
exten => 100,1,Dial(SIP/100,20)<br />
exten => 300,1,Dial(SIP/300,20)<br />
exten => 600,1,MeetMe(600)<br />
exten => 1337,1,Dial(SIP/xlite1)<br />
exten => 701,1,Voicemail(100@default)<br />
exten => 700,1,VoiceMailMain()<br />
exten => 200,1,Dial(SIP/200,20)<br />
exten => 2222,1,Playback(oc)<br />
exten => 2222,n,GoTo(s,1)<br />
exten => 4550,1,Dial(SIP/100&SIP/200&SIP/300&SIP/1337)<br />
exten => 9000,1,background(vegetaover9000)<br />
exten => 9000,n,goto(Main-Menu,s,1)<br />
exten => 3232,1,Dial(SIP/77223@voip.telephreak.org)<br />
exten => 204,1,Dial(SIP/204,20)<br />
exten => i,1,goto(Main-Menu,s,1)<br />
<br />
<br />
<br />
[extsubmenu]<br />
exten => s,1,background(line1) ;Ring all<br />
exten => s,n,background(classroom) ;Classroom<br />
exten => s,n,background(podcast) ;Podcast booth<br />
;exten => s,n,background(shop) ;Rings Shop<br />
exten => s,n,WaitExten(6|m)<br />
exten => s,n,Goto(Main-Menu,s,1)<br />
<br />
<br />
exten => 1,1,goto(Main-Menu,1,1)<br />
exten => 2,1,Dial(SIP/200)<br />
exten => 3,1,Dial(SIP/300)<br />
exten => 4,1,Dial(SIP/400)<br />
exten => i,1,GoTo(Main-Menu,s,1)<br />
<br />
[events]<br />
exten => s,1,Background(e1)<br />
exten => s,n,Background(e2)<br />
exten => s,n,Background(e3)<br />
exten => s,n,Background(e4)<br />
;exten => s,n,Background(noevents)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[contact]<br />
exten => s,1,Background(ext)<br />
exten => s,n,saydigits(1)<br />
exten => s,n,Background(vm)<br />
exten => s,n,background(web)<br />
exten => s,n,background(email)<br />
exten => s,n,GoTo(internal,s,1)<br />
<br />
[Hidden Lines]<br />
;100 Grandstream (Loft)<br />
;200 VTech (Cordless)<br />
;300 Podcast Booth<br />
;400 Shop floor<br />
;700 Voicemail Checking<br />
;701 Voicemail<br />
;1337 Nate Softphone<br />
;9000 Over 9000<br />
;4500 Page (speakers)<br />
;4550 Ring All<br />
;6000 Disco Ball<br />
;6969 Rumba<br />
;7000 Toaster<br />
<br />
<br />
<br />
[outbound-local]<br />
exten => _NXXXXXXXXX,1,Set(CALLERID(all)=2485569995)<br />
exten => _NXXXXXXXXX,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => _NXXXXXXXXX,n,Congestion()<br />
exten => _NXXXXXXXXX,n,Hangup()<br />
<br />
exten => 911,1,Set(CALLERID(all)=2485569995)<br />
exten => 911,n,Dial(IAX2/i3detroit/1${EXTEN})<br />
exten => 9911,1,Set(CALLERID(all)=2485569995)<br />
exten => 9911,n,Dial(IAX2/i3detroit/1${EXTEN}) <br />
<br />
<br />
</pre><br />
[[Category:Facility Information]][[Category:Networking]][[Category:HOWTO]][[Category:Internal HOWTO]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-11-07T02:28:44Z<p>Nate lapt: </p>
<hr />
<div>Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out!<br />
| <br />
| $0<br />
|-<br />
|make vinyl "propaganda signs"<br />
|sayings about keeping the place clean and such<br />
|<br />
|<br />
|-<br />
|make stencil on lasercutter<br />
|sayings "SWEEP If you can't read this" spraypaint on woodshop floor<br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
|<br />
|<br />
|-<br />
|sweep and vaccum<br />
|<br />
|<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard <- Whats this mean, who do I ask?<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|Forklift repair<br />
|Repair ignition switch<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|purge graveyard<br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|cyclone fence around kilm<br />
|<br />
|<br />
|<br />
|-<br />
|assemble last set of orange shelves<br />
|the ends arnt the same, either welding together or drilling and bolting<br />
|Nate W<br />
|<br />
|-<br />
|find home for injection molders<br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|find new home for paint<br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|rubber shroud for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|build a workbench area for laser cutter<br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
|<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|organize cleaning cabinet<br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|<br />
|<br />
|<br />
|-<br />
|move rack into kitchen for extra pop<br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop floor<br />
|<br />
|<br />
|<br />
|-<br />
|buy 3 drawer thingy for kitchen<br />
|buy untensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=ToDoToDo2012-11-07T00:55:35Z<p>Nate lapt: </p>
<hr />
<div>Welcome to the Potlock to do list, please pick a task and put your name in the column. (any questions? contact Dustin White dustinbikes@gmail.com)<br />
<br />
Need supplies? Toss 'em on the [[ShoppingList]] and maybe somebody will check that page from their phone next time they're at the store.<br />
<br />
<br />
{| cellspacing="1" cellpadding="1" border="1"<br />
|-<br />
! Task <br />
! Next Action <br />
! Volunteer? <br />
! Approx Cost of materials<br />
|-<br />
| Clean and sweep under graveyard area<br />
|<br />
|<br />
|<br />
|-<br />
| Rearrange phone buttons so they're accurately labeled<br />
| This is a firmware change, I just need to figure out which one it is.<br />
| Nate W<br />
| $0<br />
|-<br />
| Make "how to transfer calls, etc" cheatsheet for each phone<br />
| Figure that out!<br />
| <br />
| $0<br />
|-<br />
|make vinyl "propaganda signs"<br />
|sayings about keeping the place clean and such<br />
|<br />
|<br />
|-<br />
|make stencil on lasercutter<br />
|sayings "SWEEP If you can't read this" spraypaint on woodshop floor<br />
|<br />
|<br />
|-<br />
|install seals around garage door<br />
|<br />
|<br />
|<br />
|-<br />
|mount dust collector switches<br />
| Second switch needs ran next to the chopsaw!<br />
|<br />
|<br />
|-<br />
|sweep and vaccum<br />
|<br />
|<br />
|<br />
|-<br />
|get audio system up and running<br />
|run wire from speakers back to backboard<br />
|<br />
|terminal strips already in e-room bin<br />
|-<br />
|mount and wire security cameras<br />
|<br />
|<br />
|<br />
|-<br />
|install automatic drain on air compressor<br />
|<br />
|<br />
|<br />
|-<br />
|organize above window lumber storage areas<br />
|<br />
|<br />
|<br />
|-<br />
|organize scrap lumber under chop saw<br />
|<br />
|<br />
|<br />
|-<br />
|Chain link fence cage for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|add Cowl to furnaces<br />
|aim into metal shop, aim at west side of shop.<br />
|<br />
|<br />
|-<br />
|Forklift repair<br />
|Repair ignition switch<br />
|<br />
|<br />
|-<br />
|Replace twitterbot camera<br />
|<br />
|<br />
|<br />
|-<br />
|purge graveyard<br />
|<br />
|<br />
|<br />
|-<br />
|manage scrap metal near welding<br />
|<br />
|<br />
|<br />
|-<br />
|cyclone fence around kilm<br />
|<br />
|<br />
|<br />
|-<br />
|assemble last set of orange shelves<br />
|the ends arnt the same, either welding together or drilling and bolting<br />
|Nate W<br />
|<br />
|-<br />
|find home for injection molders<br />
| ?? - current home u no like?<br />
|<br />
|<br />
|-<br />
|find new home for paint<br />
|<br />
|<br />
|<br />
|-<br />
|cleanup and revamp hardware land<br />
|<br />
|<br />
|<br />
|-<br />
|fix sandblasters<br />
|<br />
|<br />
|<br />
|-<br />
|build shelf on sw metal shop wall for storage of materials<br />
|<br />
|<br />
|<br />
|-<br />
|rubber shroud for dust collector<br />
|<br />
|<br />
|<br />
|-<br />
|have nick take home lights, juki, and jointer<br />
|<br />
|<br />
|<br />
|-<br />
|go through wood stock and dispose of unusable<br />
|<br />
|<br />
|<br />
|-<br />
|build a workbench area for laser cutter<br />
|<br />
|<br />
|<br />
|-<br />
|build 3 lockable money boxes<br />
|<br />
|<br />
|<br />
|-<br />
|build tool holder for vinyl area<br />
|<br />
|<br />
|<br />
|-<br />
|find a solution to have am aux jack at commons table for audio<br />
|<br />
|<br />
|<br />
|-<br />
|organize cleaning cabinet<br />
|<br />
|<br />
|<br />
|-<br />
|setup scanner/copier/blog station<br />
|<br />
|<br />
|<br />
|-<br />
|return little busted ass laser to AHA<br />
|<br />
|<br />
|<br />
|-<br />
|build cart for large power supplies<br />
|<br />
|<br />
|<br />
|-<br />
|clean the hell out of craft room<br />
|<br />
|<br />
|<br />
|-<br />
|move rack into kitchen for extra pop<br />
|<br />
|<br />
|<br />
|-<br />
|clean kitchen and mop floor<br />
|<br />
|<br />
|<br />
|-<br />
|buy 3 drawer thingy for kitchen<br />
|buy untensils and bowls for kitchen from dollar tree<br />
|<br />
|<br />
|-<br />
<br />
[[Category:Organization Information]][[Category:Reference Data]]</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T09:13:39Z<p>Nate lapt: /* Injection Molding Shop Infrastructure ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Verify safety gates are functional!<br />
*Know how to properly shut down<br />
*Fire extinguishers are located?<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success? Refer to Dustins flow chart! Currently attached to side of BigBurg (Arburg 150)<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help.<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Storage<br />
| assemble pallet rack along east wall, will require grinding, <br />
possible bolts or welding to attach rails<br />
| NateW or ask for vision<br />
|- <br />
| Resin storage:<br />
| Some resin is in bins, some in paper bags, some in jugs. acquire more airtight bins/containers/barrels.<br />
http://www.imscompany.com/PublicExtra/LP_StorageBins.aspx<br />
| <br />
|- <br />
| Resin management:<br />
| Labels and database for what resin and quantity we have.<br />
| Nate W<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop, tap into overhead lines<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| Ted or Dave?<br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters/skid plates.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Solenoids: Exhaust mufflers <br />
| There are screw caps on the solenoids for caps or exhaust mufflers, most likely mufflers.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b needs new thermocouple !)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:41:35Z<p>Nate lapt: /* ToDo List Notes */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Verify safety gates are functional!<br />
*Know how to properly shut down<br />
*Fire extinguishers are located?<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success? Refer to Dustins flow chart! Currently attached to side of BigBurg (Arburg 150)<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help.<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Solenoids: Exhaust mufflers <br />
| There are screw caps on the solenoids for caps or exhaust mufflers, most likely mufflers.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b needs new thermocouple !)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:39:47Z<p>Nate lapt: /* Shop Safety! */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Verify safety gates are functional!<br />
*Know how to properly shut down<br />
*Fire extinguishers are located?<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Solenoids: Exhaust mufflers <br />
| There are screw caps on the solenoids for caps or exhaust mufflers, most likely mufflers.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b needs new thermocouple !)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:23:10Z<p>Nate lapt: /* Arburg C4b ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Solenoids: Exhaust mufflers <br />
| There are screw caps on the solenoids for caps or exhaust mufflers, most likely mufflers.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b needs new thermocouple !)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:21:53Z<p>Nate lapt: /* Project Milestones */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b needs new thermocouple !)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:20:33Z<p>Nate lapt: /* Arburg ALLROUNDER 150 ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b Done!)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:20:12Z<p>Nate lapt: /* Arburg C4b ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Degrease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Grease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b Done!)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:19:25Z<p>Nate lapt: /* Arburg ALLROUNDER 150 ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. <br />
Don't get water in the oil reservoir <br />
| anyone!!<br />
|-<br />
| Degrease machine<br />
| Find grease nipples and make sure they are lubed<br />
| NateW<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
| Connect the 2 220v lines to the bus bar, rewire from control box to motor.<br />
Ted wants to run a pendulum drop, this would be ok if a 110v outlet is also on this drop for the CB4<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it half of key is stuck in front plate on control box) <br />
Otherwise a lock in place 2 position switch is fine.<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
| Reservoir and pump, possible 5gal bucket. <br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit - should be ok at level to test, will need more soon 5-8gal aprox.<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
| This can be left in current state for time being, we dont have a mold to run, can be tested without.<br />
| <br />
|-<br />
| Test <br />
| with or without mold, there is 1 mold that may work, needs cleaning/repairs<br />
| Nate W.<br />
|-<br />
| Clean up small 6" mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b Done!)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Injection_Molding_ShopInjection Molding Shop2012-11-03T08:10:43Z<p>Nate lapt: /* Arburg C4b ToDo List */</p>
<hr />
<div>[[file:I3detroit-injectionmoldingshop.jpg|thumb|right|350px|caption blah blah blah|The injection molding shop]]<br />
<br />
== Acknowledgements ==<br />
* Thanks to Michael F. from the Lansing Makers Network for alerting i3 Detroit to the availability of these machines.<br />
* Thanks to Jim K., Roger S., Nate W., Brian W., (someone please help with this list!) for hauling these unwieldy, messy, heavy machines from an unlit pole-barn in Ionia to our space under a tight deadline.<br />
<br />
== Shop Safety! ==<br />
<br />
*Keep shop area clear of debris, spills, and other hazards. <br />
*Wear eye protection at all time when using equipment. <br />
*Wear appropriate clothing. Tie long hair back, remove dangling jewelery.<br />
*Take your time. Accidents happen because someone is in too big of a hurry. <br />
*Think about what you are doing. If something seems unsafe, it probably is.<br />
<br />
== Equipment ==<br />
<br />
*[[Arburg ALLROUNDER 150]]<br />
*[[Arburg C4b]]<br />
<br />
== Consumables ==<br />
<br />
*[[Injection Molding Shop Consumables]]<br />
** Mold Release<br />
** Resin - [http://www.midwestresins.com http://www.midwestresins.com]<br />
** Clamps<br />
** Nozzles<br />
<br />
== ToDo List Notes ==<br />
<br />
<br />
The intention of these ToDo lists is to maintain current answers to several different questions:<br />
* What do we need to do to make these machines a practical tool for our members?<br />
* How can I help with the injection molding project?<br />
* Is the project making good use of the shop space it occupies? <br />
** Is it making progress or is it stuck? <br />
** Does it have the specific resources/expertise it needs?<br />
** Does it have a practical roadmap to reach success?<br />
<br />
<br />
What am I promising to do if I put my name in a "Contact" box?<br />
* Keep track of the status of that ToDo item<br />
* Help coordinate work on that ToDo item to avoid duplication of effort<br />
* Do as much (or as little) actual work on that item as your expertise and time allow.<br />
* Most importantly, if it stops being fun, make noise! Fail loudly! If you're not seeing the progress you want to see on your ToDo item, let people know, ask for ideas and help. <br />
<br />
<br />
== Injection Molding Shop Infrastructure ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Location<br />
| Moved to east shop wall between kiln and paint storage<br />
| Done<br />
|-<br />
| Exhaust system<br />
| Note that what may appear to be a vent pipe with a red funnel is actually a chute for parts to fall down.<br />
|<br />
|-<br />
| Cooling water supply<br />
| We do not expect to need a chiller, but we do expect to need open-loop or closed-loop room-temperature water flow.<br />
| <br />
|-<br />
| Compressed air supply for the smaller machine<br />
| Extend a line into the molding shop<br />
| <br />
|-<br />
| Electrical power<br />
| Overhead pendulum drop, 240V 18A 3PH rating on large hydraulic pump motor, heater power TBD.<br />
Smaller machine is 110V.<br />
| <br />
|- <br />
| Resin storage: acquire more airtight bins/containers/barrels.<br />
| Some resin is in bins, some in paper bags, some in jugs. <br />
| <br />
|-<br />
| Hydraulic fluid spill management for the larger machine<br />
| Sheet metal pan under the machine (proposed), automotive oil pan until constructed.<br />
| <br />
|-<br />
| Wheels/casters for easy relocation of machines <br />
| Small machine needs heavy duty and lockable wheels/casters.<br />
The big machine has rubber feet for a reason, user death imminent!<br />
| <br />
|-<br />
|}<br />
<br />
== Injection Molding Shop Support ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Arburg Documentation<br />
| Phone message was left at i3 by the Arburg regional manager<br />
| Roger S.<br />
|-<br />
| Safety: Oil, resin, people near hot surfaces. Fluids under high pressure. Rapidly closing molds.<br />
|<br />
| <br />
|-<br />
| Mold Design<br />
| CAE (software tool chain?)<br />
Copy existing mold design (where to find examples?)<br />
|<br />
|-<br />
| Mold Fabrication<br />
| Tool steel appears to be impractical for our shop. <br />
Forged/rolled Al plate (specialized mold alloy) proposed.<br />
Alumold 500 is available from Alro. Expect to get many hundreds of shots with a conservatively-designed mold made from the right aluminum stock.<br />
|<br />
|-<br />
| Process Control<br />
| Temperature (two zones), pressure, cycle time, etc.<br />
| <br />
|-<br />
| Reading List<br />
| <br />
* [http://www.quickparts.com/learningcenter/basicsofinjectionmoldingdesign.aspx Basics of Injection Molding Design]<br />
* [http://www.plasticstoday.com/ Plastics Today]<br />
* [http://books.google.com/books?id=zFZT0acVel4C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=true Practical Guide to Injection Molding (on Google Books)]<br />
* [http://hyundaidoor.com.vn/images/tailieunghanhcokhi/hngdanveducphun.pdf Practical Guide to Injection Molding]<br />
<br />
| <br />
|-<br />
| Project plans/status/info on i3 Detroit wiki<br />
| First injection molding wiki page (this page) has been started<br />
| Dave S.<br />
|-<br />
|}<br />
<br />
== Arburg ALLROUNDER 150 ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Degrease more<br />
| Grab a bucket of warm/hot water, put some purple power in it, wipe grease off machine. Dont get water in the oil reservoir <br />
|<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall<br />
| Done<br />
|-<br />
| Wire <br />
|<br />
|<br />
|-<br />
| Replace key switch <br />
| (f00f says he plans to rekey it)<br />
|<br />
|-<br />
| Figure out fuses for thermal controls <br />
| (they appear to be missing)<br />
|<br />
|-<br />
| Cooling<br />
|<br />
|<br />
|-<br />
| Hydraulic fluid<br />
| lost a bit in transit<br />
|<br />
|-<br />
| Lower barrel to horizontal position<br />
|<br />
| Done<br />
|-<br />
| Test <br />
|<br />
| Nate W.<br />
|-<br />
| Clean up small mold to test <br />
|<br />
|<br />
|-<br />
|}<br />
<br />
== Arburg C4b ToDo List ==<br />
<br />
{| cellspacing="1" cellpadding="1" border="1" class "wikitable" <br />
|-<br />
! Description<br />
! Status<br />
! Contact<br />
|-<br />
| Move to new home<br />
| Located between kiln and tool crib on east wall <br />
| Done<br />
|-<br />
| Electrical wires on machine: <br />
| drooping/hanging wires, deteriorating insulation, replace main plug, <br />
no wiring diagram as yet.<br />
|<br />
|-<br />
| Cooling<br />
| not required<br />
|<br />
|-<br />
| Compressed air supply<br />
| Route line down to machines. Tap off above line if possible.<br />
|<br />
|-<br />
| Solenoids: Not engaging, could be a timer (controls on controller box) issue. <br />
| Wiring is pretty rough, Need to determine if they electrically function.<br />
| <br />
|-<br />
| Thermocouple: Replace! <br />
| Appears it fully failed<br />
| Nate W<br />
|-<br />
| Test<br />
| OMG IT MADE SOME PARTS!! <br />
Tons of work still to go<br />
| Nate W<br />
|-<br />
|}<br />
<br />
== Project Milestones ==<br />
<br />
* First photo of the Injection Molding Shop with machines and supplies in place '''(Done!)'''<br />
* Electrical power supplied, machine turns on '''(C4b Done!)'''<br />
* Working pressure reached in hydraulic circuit with no visible leaks (working pressure reached in compressed air circuit with no audible leaks) '''(C4b Done!)'''<br />
* Cooling water flowing with no visible leaks<br />
* Stable temperature control observed '''(C4b Done!)'''<br />
* Melted plastic supplied to a mold '''(C4b Done!)'''<br />
* First example of molded plastic item using mold from the pole-barn. '''(C4b Done!)'''<br />
* First mold fabricated at i3 Detroit<br />
* First example of molded plastic item using mold fabricated at i3 Detroit</div>Nate lapthttp://i3detroit.com/wi/index.php?title=Arburg_C4bArburg C4b2012-11-03T04:16:21Z<p>Nate lapt: </p>
<hr />
<div>http://i3detroit.com/wi/images/9/95/.._downloads_loop_controllers_analog_din_900M002U00-new.pdf<br />
http://i3detroit.com/wi/images/f/f8/.._downloads_loop_controllers_analog_din_AnalogSeries2000.pdf</div>Nate lapthttp://i3detroit.com/wi/index.php?title=File:.._downloads_loop_controllers_analog_din_AnalogSeries2000.pdfFile:.. downloads loop controllers analog din AnalogSeries2000.pdf2012-11-03T04:15:48Z<p>Nate lapt: </p>
<hr />
<div></div>Nate lapthttp://i3detroit.com/wi/index.php?title=Arburg_C4bArburg C4b2012-11-03T04:12:52Z<p>Nate lapt: Created page with "http://i3detroit.com/wi/images/9/95/.._downloads_loop_controllers_analog_din_900M002U00-new.pdf"</p>
<hr />
<div>http://i3detroit.com/wi/images/9/95/.._downloads_loop_controllers_analog_din_900M002U00-new.pdf</div>Nate lapt