AB's Laser Cutter
From i3Detroit
Revision as of 10:20, 24 April 2011 by Evolutioneer (Talk | contribs)
This is the main page for the big red laser cutter.
Contents |
General Info
- The laser cutter is owned by member Abi Garcia
- It is a 100 Watt CO2 laser
How to Use the Laser Cutter
Approved and Banned Materials
The laser cutter can cut or etch a wide variety of materials. However some are not possible to cut with our current set-up, and other materials release fumes that damage humans or the laser cutter itself.
The laser can only etch some materials; it will not be able to cut through them. See the approved materials list for more.
The key thing is not to try to cut:
- Any metals
- Any materials that contain glue (such as plywood)
- Any plastics or other materials that contain chlorine
Approved Materials List
| Material | Cut? | Etch? | Power | Speed |
|---|---|---|---|---|
| Natural wood (not plywood or particle board) | Yes | Yes | ||
| Acrylic | Yes | Yes | ||
| Glass | ||||
| Coated Metals | ||||
| Ceramic | ||||
| Delrin | ||||
| Cloth | ||||
| Leather | ||||
| Marble | ||||
| Matte Board | ||||
| Melamine | ||||
Banned Materials List
Do NOT try to cut or etch any of the following materials! You will be liable for any damages on the machine if you do.
Cutting Parts on the Laser Cutter
