Grizzly 16in Band Saw

From i3Detroit
Revision as of 20:17, 7 November 2012 by Djscholl (Talk | contribs)

Jump to: navigation, search


Grizzly 16in Band Saw

For sawing wood and some plastics

Basic Info

  • Ownership: Nick Britsky
  • Location: This band saw is located at the south end of the Wood Shop.
  • What it looks like:

band saw photo

Manufacturer Information

  • Make/Model: Grizzly Model G1538 16" Band Saw
  • Part Number: S/N unknown

Documentation

not specified

Rules

  • Use with wood only, or the more sawable platics. No metal cutting, please!

Instructions

Turn it On

The power switch is located on the left side of the frame.

Turn it Off

The power switch is located on the left side of the frame.

Other References

Maintenance

Things that Need to be Done

FAQs

  1. TBD

Training Points (draft content to support Ted's shop training initiative)

  • Novice (must be supervised by user or higher level)
    • Wood shop tour
    • Safety glasses, dangling hair, hoodie strings, etc.
    • Using the band saw light
    • Power switch/EPO location and operation
    • Workpiece materials compatible with this machine
    • Holding the workpiece safely
    • Using a pusher stick
    • How hard to push the workpiece
    • Sawing along a pencil line
    • Sawing curves
  • User
    • Review all points above
    • Using the miter gauge
    • Using the fence
    • Adjusting the table tilt angle
    • Dust control system
    • Cleanup with shop vac or brush
    • How to tell when the blade needs to be replaced
    • Consumables costs
  • Expert
    • Review all points above
    • Replacing the blade (tension and tracking adjustments)
    • Selecting a blade
    • Raising/lowering the upper blade guides
    • Setting upper and lower blade guide clearances
    • Making fixtures for locating/aligning the workpiece
  • Trainer
    • Expert level with sufficient experience