Difference between revisions of "HVAC"

From i3Detroit
Jump to: navigation, search
(filled in some details)
(Added link to instructions for thermostats)
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
== Heating  ==
 
== Heating  ==
The space has four independently-controlled furnaces. Please be aware that a significant fraction of your membership fees are spent on heating.
+
'''Introduction'''
 +
*The space has four independently-controlled furnaces.  
 +
*All four furnaces have the same type of thermostat.
 +
*Please be aware that a significant fraction of your wintertime membership fees are spent on heating.
 +
*Our customary wintertime temperature when working in the space is 60-65 degrees.
  
 +
 +
''' Thermostat How-To '''
 +
*The default temperature setpoint is intended to protect the space and equipment.
 +
*To prevent unattended heating, the thermostat will automatically revert to the default setpoint at certain times.
 +
*To increase the temperature for comfort, nudge the "up" arrow until comfortable.
 +
*When leaving, push the "run" button to return to the default setpoint immediately.
 +
 +
 +
''' Expert Thermostat How-To '''
 +
*Please do not push the buttons covered with green tape.
 +
*For further information on the buttons covered with green tape, contact Eric Merrill.
 +
*(For those who feel we shouldn't make Eric get in here every time the batteries get changed to reprogram the thermostats, I've uploaded the user manuals for the different thermostats to their own page, [[Thermostat Instructions]] )
 +
 +
 +
''' When Thermostats Go Wrong '''
 +
*The thermostats require two AAA batteries to operate. When the batteries are dying the display will show "lo batt" in the upper, right-hand corner. There's a tiny, phillips-head screw on the underside of the thermostat, just the right size to drop and lose forever, that has to be backed out to take the cover off. When the screw's out the cover tilts forward at the bottom and then you can take it off.
 +
 +
*Replace the two batteries ( you can find replacement batteries in the E-lab, opposite the windows, all the way to the left ) and the display should come back to life. Hook the top of the cover on the base and tilt it back into place, replace the screw and you should be ready to warm the place up.
 +
 +
 +
'''Area-Specific Information'''
 
*'''Office area'''
 
*'''Office area'''
**Central heating (furnace located on roof? in closet? location of air filters?)
+
**The office has central heating (furnace located on roof? in closet? location of air filters?).
**Thermostat located in hallway, between the kitchen door and chem lab door
+
**The thermostat is located in the hallway, between the kitchen door and chem lab door.
***Please keep the office area at 55 degrees when unoccupied.
+
**The default temperature setpoint in the office area is 55 degrees.
***Our customary office area temperature when occupied is 65 degrees.
+
***To increase temperature, nudge the "up" arrow until happy. Stop.
+
***When leaving, push the "run" button to return to the 55-degree setpoint.
+
 
*'''South shop area'''
 
*'''South shop area'''
**Overhead furnace near main entrance
+
**There is an overhead furnace near the main entrance.
**Thermostat on shop side of north kitchen wall
+
**This furnace is NOT TURNED ON right now. Please just ignore it.
***This furnace is NOT TURNED ON right now. Just ignore it.
+
**The thermostat is on the shop side of north kitchen wall.
 
*'''North shop area'''
 
*'''North shop area'''
**Two overhead furnaces in the Fab Lab area
+
**There are two overhead furnaces in the Fab Lab area.
 
**Each furnace has its own thermostat mounted on the nearest shop wall. (One is behind the sandblaster.)
 
**Each furnace has its own thermostat mounted on the nearest shop wall. (One is behind the sandblaster.)
***The following guidlines apply to both north shop furnace thermostats.
+
**The default temperature setpoint in the shop area at 45 degrees.
***Please keep the shop area at 45 degrees when unoccupied.
+
 
***Our customary shop temperature when occupied is 60 degrees.
+
***Please do not push the buttons covered with green tape.
+
***If you feel that you absolutely must push the buttons covered with green tape, please refer to the next bullet point.
+
***Contact Eric Merrill for information on how to become a fully-fledged member of the thermostat committee.
+
***To warm the shop for a few hours, push the uncovered buttons to raise the temperature setpoint.
+
***After some period of time, the thermostat will revert to 45 degrees. When this happens, the temperature setpoint can be manually raised again.
+
***If you are the last person leaving the shop, please push the run button to immediately revert to 45 degrees.
+
  
 
== Ventilation  ==
 
== Ventilation  ==
Line 38: Line 53:
 
**Laser cutter
 
**Laser cutter
 
**Dust collector (under construction)
 
**Dust collector (under construction)
 +
  
 
== Air Conditioning  ==
 
== Air Conditioning  ==
The office area is air conditioned. Please be aware that a significant fraction of your membership fees are spent on air conditioning.
+
Please be aware that a significant fraction of your summertime membership fees are spent on air conditioning for the office area.
  
 
*'''Office Area'''
 
*'''Office Area'''
 
**Central air conditioning (location of air filters?)
 
**Central air conditioning (location of air filters?)
**Thermostat somewhere in the office area
+
**The thermostat is located in the hallway, between the kitchen door and chem lab door.
***Our customary office area temperature when occupied is ?? degrees.
+
**Our customary office area temperature when occupied is ?? degrees.
***Please turn off the air conditioning when the office area is unoccupied.
+
**Please turn off the air conditioning when the office area is unoccupied.
***How to work this thermostat?
+
**How to work this thermostat?
 +
 
 +
[[Category:Facility Information]]

Revision as of 13:16, 6 December 2012

Heating

Introduction

  • The space has four independently-controlled furnaces.
  • All four furnaces have the same type of thermostat.
  • Please be aware that a significant fraction of your wintertime membership fees are spent on heating.
  • Our customary wintertime temperature when working in the space is 60-65 degrees.


Thermostat How-To

  • The default temperature setpoint is intended to protect the space and equipment.
  • To prevent unattended heating, the thermostat will automatically revert to the default setpoint at certain times.
  • To increase the temperature for comfort, nudge the "up" arrow until comfortable.
  • When leaving, push the "run" button to return to the default setpoint immediately.


Expert Thermostat How-To

  • Please do not push the buttons covered with green tape.
  • For further information on the buttons covered with green tape, contact Eric Merrill.
  • (For those who feel we shouldn't make Eric get in here every time the batteries get changed to reprogram the thermostats, I've uploaded the user manuals for the different thermostats to their own page, Thermostat Instructions )


When Thermostats Go Wrong

  • The thermostats require two AAA batteries to operate. When the batteries are dying the display will show "lo batt" in the upper, right-hand corner. There's a tiny, phillips-head screw on the underside of the thermostat, just the right size to drop and lose forever, that has to be backed out to take the cover off. When the screw's out the cover tilts forward at the bottom and then you can take it off.
  • Replace the two batteries ( you can find replacement batteries in the E-lab, opposite the windows, all the way to the left ) and the display should come back to life. Hook the top of the cover on the base and tilt it back into place, replace the screw and you should be ready to warm the place up.


Area-Specific Information

  • Office area
    • The office has central heating (furnace located on roof? in closet? location of air filters?).
    • The thermostat is located in the hallway, between the kitchen door and chem lab door.
    • The default temperature setpoint in the office area is 55 degrees.
  • South shop area
    • There is an overhead furnace near the main entrance.
    • This furnace is NOT TURNED ON right now. Please just ignore it.
    • The thermostat is on the shop side of north kitchen wall.
  • North shop area
    • There are two overhead furnaces in the Fab Lab area.
    • Each furnace has its own thermostat mounted on the nearest shop wall. (One is behind the sandblaster.)
    • The default temperature setpoint in the shop area at 45 degrees.


Ventilation

The shop area has many types of ventilation equipment.

  • Shop roof exhaust fans (blocked off in winter)
  • Metal shop wall exhaust fans (currently do not work)
  • Shop ceiling fans
    • Controlled by dimmer switch next to front door
    • Recommend half-speed operation in wintertime when space is occupied
  • Specialized exhaust systems
    • Welding area
    • Laser cutter
    • Dust collector (under construction)


Air Conditioning

Please be aware that a significant fraction of your summertime membership fees are spent on air conditioning for the office area.

  • Office Area
    • Central air conditioning (location of air filters?)
    • The thermostat is located in the hallway, between the kitchen door and chem lab door.
    • Our customary office area temperature when occupied is ?? degrees.
    • Please turn off the air conditioning when the office area is unoccupied.
    • How to work this thermostat?