Jet Drill Press
From i3Detroit
 | Remember to always; clean up and return the equipment to a fully functional, safe state before you leave. This includes returning any safety mechanisms to fully working order. |
Jet Drill Press
It is most often used for drilling holes in wood, plastic, and related materials. With specialized bits, it can also be used for sanding.
Basic Info
- Ownership: Dave Scholl
- Location: In the wood shop on a rolling cart.
- What it looks like:
Manufacturer Information
- Make/Model: Jet JDP-15M
- Part Number: Stock No. 354165, Serial No. 7090087
Documentation
- User manual
- Please read the drill press safety tips in the Rapidly-Rotating Scythe FAQ.
Rules
- Please wear safety glasses!
- Please clamp your work to the drill press table.
- Before you drill, check to make sure your bit is located over the hole in the table. When the table is raised or lowered, it can swing a little bit to the side. If the hole is not aligned under the bit, when the drill goes through the workpiece it will make another divot like the one you can see on the table now.
Instructions
- The chuck key is on a retractable chain on the right-hand side, next to the motor.
- Drill press clamps and the drill press vise are kept in the cart under the drill press.
Other References
TBD
Maintenance
TBD
Things that Need to be Done
- Build Cabinet for Drill Press tools and accessories
FAQs
TBD
