MIG Welder

From i3Detroit
Revision as of 14:04, 3 August 2013 by Mccord42 (Talk | contribs)

Jump to: navigation, search


Lincoln Weld-Pak 100 MIG Welder

This unit is a small, basic MIG welder. However, since it is not fitted out with a gas shield, it can only be used as flux-core, not true MIG.

Basic Info

  • Ownership: Roger S
  • Location: on the welding bench, in the welding area
  • What it looks like:

Lincolnwelder.jpg

Manufacturer Information

  • Make/Model: Lincoln Weld-Pak 100 MIG Welder
  • Part Number:

Documentation

http://www.lincolnelectric.com/assets/ServiceNavigator/LINCOLN3/im546.pdf

Rules

  • Always make sure that the weld curtains are in place to protect other members in the area.
  • Use proper personal safety equipment

Instructions

Please see the documentation at the link above.

Other References

  • Welder consumables are on this list: Welding Shop Consumables
  • The main consumable is the welding wire, aka electrode. This machine only supports self shielding electrode, which currently is only made for mild and low alloy steels. The package should specify that it is self shielding with no need for a shielding gas.

Maintenance

Does this thing need it's oil changed every 30 cycles? People need to know!

Things that Need to be Done

  1. Check into the gas adapter - This would allow use of regular MIG wire, expanding the ability of the machine to use on other metals.

FAQs

A list of commonly asked questions