← Older revision

Revision as of 00:52, 18 May 2013

(One intermediate revision by one user not shown)

Line 1:

{{Equipment

| Name = Delta 12in Disc Sander

−

| Intro = For shaping/sanding wood. A very versatile tool good for removing ~~both large and~~ small amounts of material ~~depending on what grit sanding disc is on the machine~~. Within limits (see below), plastic and aluminum can also be sanded.

+

| Intro = For shaping/sanding wood. A very versatile tool good for removing small amounts of material and splinters. Within limits (see below), plastic and aluminum can also be sanded.

−

| Owner = ~~Dustin White~~

+

| Owner = Dave Scholl

| StorageLocation = This disc sander is located on a rolling cart in the Wood Shop.

| MakeModel = Delta 31-120

−

| PartNumber = S/N ~~304080~~

+

| PartNumber = S/N 00013

| Documentation =

| LooksLike = [[File:delta12indiscsander.jpg|disc sander photo]]

Line 27:

* The sander takes 12" adhesive backed discs.

* To change the disc; loosen the table to allow easier access to the disc, peel off the used disc, clean the metal platter with denatured alcohol, peel backing off half of new disc, carefully slip the exposed half of disc between the table and disc, align sanding disc on platter and peel remaining backing off of disc, press disc onto platter to ensure good adhesion, readjust and tighten the table, SAND!

−

* If the power switch fails in the ON position, try taking it apart and cleaning the burned sawdust out of the contacts. This technique returned the switch to working order on 12/21/2012.

+

* If the power switch fails in the ON position, try taking it apart and cleaning the burned sawdust out of the contacts. This technique returned the switch on a similar sander to working order on 12/21/2012.

| ToDos =

| FAQs =

@@ Line 1: / Line 1: @@
 {{Equipment
 | Name = Delta 12in Disc Sander
-| Intro = For shaping/sanding wood. A very versatile tool good for removing both large and small amounts of material depending on what grit sanding disc is on the machine. Within limits (see below), plastic and aluminum can also be sanded.
+| Intro = For shaping/sanding wood. A very versatile tool good for removing small amounts of material and splinters. Within limits (see below), plastic and aluminum can also be sanded.
-| Owner = Dustin White
+| Owner = Dave Scholl
 | StorageLocation = This disc sander is located on a rolling cart in the Wood Shop.
 | MakeModel = Delta 31-120
-| PartNumber = S/N 304080
+| PartNumber = S/N 00013
 | Documentation =
 | LooksLike = [[File:delta12indiscsander.jpg|disc sander photo]]
@@ Line 27: / Line 27: @@
 * The sander takes 12" adhesive backed discs.
 * To change the disc; loosen the table to allow easier access to the disc, peel off the used disc, clean the metal platter with denatured alcohol, peel backing off half of new disc, carefully slip the exposed half of disc between the table and disc, align sanding disc on platter and peel remaining backing off of disc, press disc onto platter to ensure good adhesion, readjust and tighten the table, SAND!
-* If the power switch fails in the ON position, try taking it apart and cleaning the burned sawdust out of the contacts. This technique returned the switch to working order on 12/21/2012.
+* If the power switch fails in the ON position, try taking it apart and cleaning the burned sawdust out of the contacts. This technique returned the switch on a similar sander to working order on 12/21/2012.
 | ToDos =
 | FAQs =

i3Detroit - Changes related to "Wood Shop Training" [en]

Delta 12in Disc Sander