Torqcut
(Difference between revisions)
m |
Dustinbikes (Talk | contribs) |
||
| Line 5: | Line 5: | ||
| Intro = A vertical CNC machining center with 22" travel. | | Intro = A vertical CNC machining center with 22" travel. | ||
| − | | Owner = Nate Bezanson (48%), | + | | Owner = Nate Bezanson (48%),John Anderson (18.5%), Brian Wennberg (18.5%), James Kemp (15%) |
| StorageLocation = In the center of the shop - it's the huge gray thing. | | StorageLocation = In the center of the shop - it's the huge gray thing. | ||
Revision as of 21:56, 25 January 2013
 | Remember to always; clean up and return the equipment to a fully functional, safe state before you leave. This includes returning any safety mechanisms to fully working order. |
Bridgeport Discovery Torq-Cut 22
A vertical CNC machining center with 22" travel.
Basic Info
- Ownership: Nate Bezanson (48%),John Anderson (18.5%), Brian Wennberg (18.5%), James Kemp (15%)
- Location: In the center of the shop - it's the huge gray thing.
- What it looks like:
Manufacturer Information
- Make/Model: Torq-Cut 22
- Part Number:
Documentation
not specified
Rules
Must be on the list of operators to actually run the machine, but anyone can request a part to be cut. This will be flushed out better once the tool chain is set up.
Instructions
You can write the instructions here. Or maybe add a link to another page or the user's manual.
Other References
not specified
Maintenance
Maintenance Info is kept on this page:
Bridgeport_Maintenance
Things that Need to be Done
In the final stages of being set up. Tool chain still needs to be defined.
FAQs
A list of commonly asked questions
