Vinyl Cutter-US Cutter Refine MH-720
Revision as of 01:42, 25 November 2012 by CrazyPyro
|Remember to always; clean up and return the equipment to a fully functional, safe state before you leave. This includes returning any safety mechanisms to fully working order.|
Purple Black Vinyl Cutter
- Ownership: 100% Nick Briksy
- Location: not specified'
- What it looks like:
- Make/Model: not specified
- Part Number: not specified
Be excellent to each other!
- Design your sticker,sign, or shirt. You will need access to vector graphics software to do this. (Illustrator, Coral Draw, cor SK1)
- Export as a vector format, but not SVG. (At least for Inkscape, EPS format works well.)
- Turn on cutter at the power strip and the red switch on its left side.
- Use the V+/V-/F+/F- arrow keys to set speed to 8 in/s and force to 30g.
- Move the 3 levers in the back to the up position so you can feed in the vinyl.
- Vinyl feeds face-up, in from the back and out the front. The cut will start at the silver stylus - position accordingly.
- You will want to use vinyl wide enough to fit under at least 2 of the rollers, so that it doesn't twist while cutting.
- Move the 3 levers in the back to the down position to hold the vinyl in place.
- Open FlexiSign Pro and import your file. (Don't worry about size and position just yet. TWSS.)
- File->Cut/Plot... (Ctrl+L)
- If asked, choose "MH-721_3@COM4"
- In the Cut/Plot dialog, you can adjust size and position. (The bottom-right corner corresponds to the silver stylus / origin.)
- Click the "Send" button at the bottom-right to print/cut.
- After the cut is finished, move the 3 levers in the back to the up position so you can remove the vinyl.
- Pay for the vinyl you cut ($1 per linear Foot sign vinyl and $2.50 per linear foot for shirt vinyl).
- Weed and apply transfer paper or apply to shirt with heat press.
Things that Need to be Done
|Rocco Marras||Vinyl Guru||Zone Warden|
|Dustin White||pretty good|
|Bacon||The leader of the Vinyl Revolution|
|Fireman Dave||Master Vinyl Cutter|