Difference between revisions of "Workbench"

From i3Detroit
Jump to: navigation, search
(Midwest Fastener Corp Hardware Proposal)
Line 42: Line 42:
 
| Lock & Regular
 
| Lock & Regular
 
|}
 
|}
 +
 +
 +
==Work at the Vise==
 +
Sometimes the quickest (and safest) way to do something is using simple hand tools at the vise.  Need to cut a piece of metal?  Try an hacksaw!
 +
 +
*14 Teeth per Inch (TPI):    Large Sections of Mild Material
 +
*18 TPI:    Large Sections of Tough Material
 +
*24 TPI:    Angle Iron, Heavy Pipe, Brass or Copper
 +
*32 TPI:    Thin Tubing
 +
 +
 +
You can also use a Hand File to Shape / Debur Metal.
 +
*Ensure File has securely attached handle for safety.
 +
*Use file brush card to remove stuck material from face of file.
 +
*Sidewalk chalk on the file before use prevents material getting stuck or 'pinned' to the file, particularly aluminum.

Revision as of 19:08, 6 June 2011

Contents

Tool Use

  • If you use it, put it back when you're done with it.
  • If you don't know how to use a tool, ask!
  • If you break it, post about it to the list to figure out how to resolve it.


Trash

  • If you're buying trash bags, get the 33-gallon drawstring type. They fit the 32-gallon cans nicely. There is one 45-gallon can too.
  • Please don't throw sheet metal, copper, or aluminum away. We recycle these.


Harbor Freight (Hossfeld Style) Bender

  • This is a great tool for bending flat strips of metal, or bending heavy rod.
  • How-to manual can be downloaded from Harbor Freight

Harbor Freight Bender.jpg

Midwest Fastener Corp Hardware Proposal

  • Based on last member meeting, I am looking for a list of all the hardware we would use on a regular basis to send to MFC for a quote. Priority (High: Everyday, Medium: Weekly, Low: Monthly, Minimal: Yearly). I listed a few to get you started.
Name Type Approx Used per Quarter Priority Notes
1/4"-20 (Coarse) Hex Bolts 200 High-Medium Assorted Lengths from 3/4" to 4"
1/4"-20 Standard Washers 200 High-Medium Lock & Regular
1/4"-20 (Coarse) Standard Hex Nuts 200 High-Medium Lock & Regular


Work at the Vise

Sometimes the quickest (and safest) way to do something is using simple hand tools at the vise. Need to cut a piece of metal? Try an hacksaw!

  • 14 Teeth per Inch (TPI): Large Sections of Mild Material
  • 18 TPI: Large Sections of Tough Material
  • 24 TPI: Angle Iron, Heavy Pipe, Brass or Copper
  • 32 TPI: Thin Tubing


You can also use a Hand File to Shape / Debur Metal.

  • Ensure File has securely attached handle for safety.
  • Use file brush card to remove stuck material from face of file.
  • Sidewalk chalk on the file before use prevents material getting stuck or 'pinned' to the file, particularly aluminum.