Sewing Vent

From i3Detroit
Jump to: navigation, search
Sewing Vent
Cnc vent.jpg
Name CNC vent
Zone CNC Shop


Owner i3Detroit
Make Model Sonoff TH16 (modified)
Part Number
Date Acquired 2017-11
Storage Location in the hallway outside the sewing zone
Authorization Required No
Status Running
Value $300
IP Address 10.13.107.132
MAC Address 2C:3A:E8:08:03:AF
Hostname cnc-vent
Documentation https://github.com/arendst/Sonoff-Tasmota/wiki
Other References


Intro

Rules

Instructions

Maintenance Info

If uploading new software to this it needs three commands to be fully functional:

gpio4 9

gpio14 29

switchmode 3

I also had to make some hardware modifications (pictured) based on information from here

The pinout of the TRRS connector to the button/LED
The pinout of the TRRS connector to the button/LED
0 ohm jumper, 10k pull down (DIY)
final wire color code

FAQ

ToDo


Sewing Vent Zone: CNC Shop https://www.i3detroit.org/wi/images/4/4f/Authorization_not_required.svg "/> https://www.i3detroit.org/wiki/Sewing_Vent

IOT device died as it got wet from rain. Module bypassed and can be turned on or off with the breaker in the A side NW corner.