Welding Area TODO

From i3Detroit
Jump to navigation Jump to search

Current items are in the old style, on https://www.i3detroit.org/wiki/Category:Welding_Area#Wishlist_and_Tasks

Could really use some help getting updated to the new style.....

General TODOs

Task Name Description Priority Champion

Equipment TODOs

 TODO
Bench-Mounted Manual Metal ShearAdd a spring loaded hold down to the left (anvil) side
CNC Plasma Cutter
  1. Install permanent air drop for the machine, check air humidity/oil/etc. (Complete)
  2. Install permanent power for the CNC side of the machine
  3. Clean out the water table (Complete 10/21/25. Alex Zurowski and Will Cunningham)
  4. Seal water table leaks (Complete 10/17/25. Alex Zurowski and Will Cunningham)
  5. Install limit switches (included with purchase, not currently installed)
  6. Develop class content for training (Complete 12/3/25. Alex Zurowski)
  7. Inventory consumables for the plasma cutter (Complete 10/21/25. Alex Zurowski and Will Cunningham)
  8. Determine per-minute rate for using the machine (Complete 11/17/25. Alex Zurowski)
  9. Put together instructions on swapping to the hand torch on the plasma cutter for hand work
  10. Create signs for Down/Training/Etc (Complete 11/17/25. Alex Zurowski)
  11. Email Plasma Green about water evaporation and refilling. (Complete 10/22 Will Cunningham)
Hossfeld 2 Universal bender
  • Source more dies
  • Add a good pic to this page
  • Add the manual or a link to it
  • Maybe find some good videos and link them
Synchrowave 350 LX
  1. Develop a better cable management system.
  2. Order more rods/cups/nozzles.
Welding TableReplace with a proper layout table and a flat welding table w/ threaded anchor holes. Maybe a downdraft table too. 4x8 for the layout table, a couple of 4x4 welding tables that can be clamped together, 3x4 for the downdraft, ideally 3 of them, each with their own set of practice welders.
Retrieved from "https://www.i3detroit.org/wi/index.php?title=Welding_Area_TODO&oldid=28792"